Influence of grinding parameters on grinding force and temperature in grinding of AA6061-TiB2/ZrB2 in-situ composite

被引：2
|
作者：
Mahamani, A. [1 ]
Jawahar, S. [1 ]
机构：
[1] Sri Venkateswara Coll Engn & Technol Autonomous, Dept Mech Engn, Chittoor 517127, AP, India
来源：
3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018 | 2018年 / 390卷
关键词：
METAL-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; GRINDABILITY; OPTIMIZATION;
D O I：
10.1088/1757-899X/390/1/012004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In-situcomposite material synthesis has been widely recognized by the researchers owing tofine particle size, clean interface, and smart wettability of the reinforcement with the matrix. Variation of wheel speed, work speed, depth of cut and feed rate on grindability of AA6061-5% TiB2/ZrB2 in-situ composite are investigated. The present work is aimed to investigate the Grinding force and grinding temperature of the AA6061-TiB2/ZrB2 in-situ composite under various grinding parameters and wheel materials. A hike of wheel speed decreases the grinding force an increase in temperature. Increase in work speed, depth of cut and feed rate increase the grinding force and grinding temperature. This experimental investigation helps to control the grinding force and grinding temperature at the various grinding condition.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Influence of diamond grinding process on material removal mechanisms and surface roughness of 0/90° continuous carbon fiber reinforced ZrB2
    Roesiger, Achim
    Kleiner, Stefan
    Unseld, Simon
    Goller, Ralf
    Zoli, Luca
    Sciti, Diletta
    OPEN CERAMICS, 2024, 20
  • [32] An analysis of mechanical properties and optimization of EDM process parameters of Al 4032 alloy reinforced with Zrb2 and Tib2 in-situ composites
    Rengasamy, N. V.
    Rajkumar, M.
    Kumaran, S. Senthil
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 662 : 325 - 338
  • [33] Toughening mechanism of in-situ synthesized ZrB2 based composite coating by plasma spraying
    Cui, Yu-hang
    Jia, Shi-tong
    Yang, Yong
    Ma, Yu-duo
    Wang, Yan-wei
    Wang, Xing-yu
    Sun, Wen-wei
    Wang, Lei
    Wang, Liang
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (06) : 4145 - 4152
  • [34] Toughening mechanism of in-situ synthesized ZrB2 based composite coating by plasma spraying
    Yu-hang Cui
    Shi-tong Jia
    Yong Yang
    Yu-duo Ma
    Yan-wei Wang
    Xing-yu Wang
    Wen-wei Sun
    Lei Wang
    Liang Wang
    Journal of Materials Science, 2022, 57 : 4145 - 4152
  • [35] In-situ preparation of Al matrix composites reinforced by TiB2 particles and sub-micron ZrB2
    Degang Zhao
    Xiangfa Liu
    Yuxian Liu
    Xiufang Bian
    Journal of Materials Science, 2005, 40 : 4365 - 4368
  • [36] In-situ preparation of Al matrix composites reinforced by TiB2 particles and sub-micron ZrB2
    Zhao, DG
    Liu, XF
    Liu, YX
    Bian, XF
    JOURNAL OF MATERIALS SCIENCE, 2005, 40 (16) : 4365 - 4368
  • [37] Investigations on the influence of particle reinforcement and wire materials on the surface quality and machining characteristics of AA6061-TiB2 alloy in WEDM
    Ramraji, K.
    Rajkumar, K.
    Selvakumar, G.
    Prakash, Ram S.
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (03)
  • [38] Fabrication, characterization and analysis of improvements in mechanical properties of AA7075/ZrB2 in-situ composites
    Nallusamy, M.
    Sundaram, S.
    Kalaiselvan, K.
    MEASUREMENT, 2019, 136 : 356 - 366
  • [39] Microstructural and wear characterization of friction stir processed ZrB2/AA7075 in-situ composites
    Prasad, Rabindra
    Tewari, S. P.
    Singh, J. K.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
  • [40] Preparation, microstructures and mechanical properties of in-situ (TiB2+ ZrB2)/AlSi9Cu3 composites
    Zhang, S.-L.
    Shi, X.-X.
    Zhao, Y.-T.
    Zhang, B.-R.
    Liang, Z.-P.
    Yin, H.-S.
    Dou, B.-Y.
    Zhang, Q.
    Wang, C.-X.
    Zhao, Y.-T. (820447049@qq.com), 1600, Elsevier Ltd (673): : 349 - 357
12345