Influence of grinding parameters on grinding force and temperature in grinding of AA6061-TiB2/ZrB2 in-situ composite

被引：2
|
作者：
Mahamani, A. [1 ]
Jawahar, S. [1 ]
机构：
[1] Sri Venkateswara Coll Engn & Technol Autonomous, Dept Mech Engn, Chittoor 517127, AP, India
来源：
3RD INTERNATIONAL CONFERENCE ON MATERIALS AND MANUFACTURING ENGINEERING 2018 | 2018年 / 390卷
关键词：
METAL-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; GRINDABILITY; OPTIMIZATION;
D O I：
10.1088/1757-899X/390/1/012004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In-situcomposite material synthesis has been widely recognized by the researchers owing tofine particle size, clean interface, and smart wettability of the reinforcement with the matrix. Variation of wheel speed, work speed, depth of cut and feed rate on grindability of AA6061-5% TiB2/ZrB2 in-situ composite are investigated. The present work is aimed to investigate the Grinding force and grinding temperature of the AA6061-TiB2/ZrB2 in-situ composite under various grinding parameters and wheel materials. A hike of wheel speed decreases the grinding force an increase in temperature. Increase in work speed, depth of cut and feed rate increase the grinding force and grinding temperature. This experimental investigation helps to control the grinding force and grinding temperature at the various grinding condition.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Mechanism of surface generation in grinding aa6061-tib2/zrb2 in-situ composite
    Mahamani A.
    Jawahar S.
    Davim J.P.
    Journal of Computational and Applied Research in Mechanical Engineering, 2021, 10 (02): : 311 - 324
  • [2] Investigation on laser drilling of AA6061-TiB2/ZrB2 in situ composites
    Mahamani, A.
    Chakravarthy, V. V. Anantha
    MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (15) : 1700 - 1706
  • [3] Dry sliding wear and friction characteristics of AA6061-TiB2/ZrB2 in-situ metal matrix composites at room temperature
    Mahamani, A.
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2017, 11 (02) : 148 - 173
  • [4] Dry sliding wear behavior of AA6061/ZrB2 in-situ composite
    Dinaharan, I.
    Murugan, N.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (04) : 810 - 818
  • [5] Influence of electrical discharge machining parameters on surface roughness in machining of Al 6061-TiB2/ZrB2 in-situ metal matrix composite
    Mahamani, A.
    Sakthivelan, N.
    Kumar, J. Sai
    Reddy, M. Vijaya Sekhar
    Naidu, P. Vamsi Krishna
    Rithesh, M.
    Veeranagaiah, K.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 405 - 409
  • [6] Dry sliding wear and friction characteristics of AA6061 - TiB2/ZrB2 in-situ metal matrix composites at room temperature
    Mahamani A.
    Mahamani, A. (mahamanisudhan@gmail.com), 1600, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (11): : 148 - 173
  • [7] Influence of turning parameters on the machinability of Al6061/ZrB2 & ZrC hybrid in-situ Aluminium Matrix Composite
    Ruban, S. Rajesh
    Wins, K. Leo Dev
    Selvam, J. David Raja
    Rai, Rajakumar S.
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2023, 21 (04) : 1218 - 1229
  • [8] Multi-response Optimization of Process Parameters in Laser Drilling of AA6061-TiB2/ZrB2 In Situ Composite Produced by K2TiF6-KBF4-K2ZrF6 Reaction System
    Mahamani, A.
    Chakravarthy, V. V. Anantha
    ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 421 - 432
  • [9] Experimental Parametric Investigation of Electrochemical Drilling of AA6061-TiB2 In Situ Composites
    Chandrasekhar S.
    Prasad N.B.V.
    Journal of The Institution of Engineers (India): Series C, 2019, 100 (05) : 771 - 778
  • [10] Multi-Response Optimization of Turning Parameters with Vikor-Entropy Method on Machining of AA6061-TiB2 In-Situ Composites
    Chandrasekhar, S.
    Sastry, K. S. B. S. V. S.
    Murali, G.
    Karuturi, Lalithya
    JOURNAL OF POLYMER & COMPOSITES, 2023, 11 : S256 - S268
12345