POSSIBILITIES OF METALS EXTRACTON FROM SPENT METALLIC AUTOMOTIVE CATALYTIC CONVERTERS BY USING BIOMETALLURGICAL METHOD

被引：5

作者：

Willner, J. ^{[1
]}

Kadukova, J. ^{[2
]}

Fornalczyk, A. ^{[1
]}

Mrazikova, A. ^{[2
]}

Marcincakova, R. ^{[2
]}

Velgosova, O. ^{[2
]}

机构：

[1] Silesian Tech Univ, Inst Met Technol, PL-40019 Katowice, Poland

[2] Tech Univ Kosice, Dept Mat Sci, Kosice, Slovakia

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2015年 / 60卷 / 03期

关键词：

spent catalytic converters; metallic carrier; biometallurgy; Acidithiobacillus bacteria; PRINTED-CIRCUIT BOARDS; RECOVERY; PLATINUM; COPPER;

D O I：

10.1515/amm-2015-0320

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The main task of automotive catalytic converters is reducing the amount of harmful components of exhaust gases. Metallic catalytic converters are an alternative to standard ceramic catalytic converters. Metallic carriers are usually made from FeCrAl steel, which is covered by a layer of Precious Group Metals (PGMs) acting as a catalyst. There are many methods used for recovery of platinum from ceramic carriers in the world, but the issue of platinum and other metals recovery from metallic carriers is poorly described. The article presents results of preliminary experiments of metals biooxidation (Fe, Cr and Al) from spent catalytic converters with metallic carrier, using bacteria of the Acidithiobacillus genus.

引用

页码：1877 / 1880

页数：4

共 50 条

[21] NO and C Oxidation with Pt Recovered From Spent Catalytic Converters
Caroca, Jose Carlos
Cicoria, Juan Pablo
Palmisano, Pietro
Bensaid, Samir
Fino, Debora
Russo, Nunzio
WASTE AND BIOMASS VALORIZATION, 2010, 1 (02) : 235 - 239
[22] NO and C Oxidation with Pt Recovered From Spent Catalytic Converters
Jose Carlos Caroca
Juan Pablo Cicoria
Pietro Palmisano
Samir Bensaid
Debora Fino
Nunzio Russo
Waste and Biomass Valorization, 2010, 1 : 235 - 239
[23] A new approach to recover platinum-group metals from spent catalytic converters via iron matte
Morcali, Mehmet Hakan
RESOURCES CONSERVATION AND RECYCLING, 2020, 159
[24] Real life experimental determination of platinum group metals content in automotive catalytic converters
Yakoumis, I.
Moschovi, A. M.
Giannopoulou, I.
Panias, D.
E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS, 2018, 329
[25] Platinum leaching from automotive catalytic converters with aqua regia
Hasani, M.
Khodadadii, A.
Koleini, S. M. J.
Saeedi, A. H.
Perez-Pacheco, Y.
Melendez, A. M.
II COLOMBIAN CONGRESS OF ELECTROCHEMISTRY (CCEQ) AND 2ND SYMPOSIUM ON NANOSCIENCE AND NANOTECHNOLOGY (SNN), 2017, 786
[26] Recovery of platinum group metals from spent automotive converters by leaching with organic and inorganic acids and extraction with quaternary phosphonium salts
Wiecka, Zuzanna
Rzelewska-Piekut, Martyna
Regel-Rosocka, Magdalena
SEPARATION AND PURIFICATION TECHNOLOGY, 2022, 280
[27] DISSOLUTION OF CERAMIC MONOLITH OF SPENT CATALYTIC CONVERTERS BY USING HYDROMETALLURGICAL METHODS
Wilner, J.
Fornalczyk, A.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (04) : 2945 - 2948
[28] Ozone and heavy metals from automobile catalytic converters
Ballach, HJ
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 1997, 4 (03) : 131 - 139
[29] Extraction of platinum group metals from catalytic converters
Chidunchi, Irina
Kulikov, Maxim
Safarov, Ruslan
Kopishev, Eldar
HELIYON, 2024, 10 (03)
[30] Ozone and heavy metals from automobile catalytic converters
Environmental Science and Pollution Research, 1997, 4 (3) : 131 - 139

← 1 2 3 4 5 →