Improving durability of cross laminated timber (CLT) with borate treatment

被引：7

作者：

Bagheri, Sajad ^{[1
]}

Alinejad, Mona ^{[2
]}

Ohno, Katie ^{[3
]}

Hasburgh, Laura ^{[3
]}

Arango, Rachel ^{[3
]}

Nejad, Mojgan ^{[1
,2
]}

机构：

[1] Michigan State Univ, Chem Engn & Mat Sci Dept, 480 Wilson Rd, E Lansing, MI 48824 USA

[2] Michigan State Univ, Dept Forestry, E Lansing, MI 48824 USA

[3] US Forest Serv, USDA, Forest Prod Lab, Madison, WI USA

来源：

JOURNAL OF WOOD SCIENCE | 2022年 / 68卷 / 01期

基金：

美国食品与农业研究所;

关键词：

Mass-timber; Borate; Durability; Flammability; Termite resistance; Decay resistance; Spray treatment; DOUGLAS-FIR; WOOD; RESISTANCE; BORON; PREDICTION;

D O I：

10.1186/s10086-022-02041-6

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Borate solution was used to treat two sets of Douglas-fir wood samples, one by spraying cross-laminated timbers (CLT) and another set by dip-treating wood in solutions at different retentions. A novel model was developed to explain and predict borate uptake based on dip-treatment parameters. Small-scale CLT samples were prepared using commercial emulsion polymer isocyanate (EPI) and polyurethane (PU) adhesive with dip-treated wood. The effect of adhesive and borate retention on CLT samples were evaluated through adhesion, fire, termite, and decay tests. The adhesion strength of wood was statistically unaffected by borate treatment. Statistical analysis showed that both spray- and dip-treated samples had significantly higher termite and decay resistance and fire performance than the untreated boards. Untreated CLT samples bonded with PU showed a considerably higher inherent decay and termite resistance than untreated specimens bonded with EPI adhesive.

引用

页数：16

共 50 条

[21] Out-of-plane bending properties of cross laminated timber (CLT)
Brandner, Reinhard
Ringhofer, Andreas
Sieder, Raimund
CONSTRUCTION AND BUILDING MATERIALS, 2024, 438
[22] Cross-laminated Timber (CLT) in China: A State-of-the-Art
Li H.
Wang B.J.
Wei P.
Wang L.
Journal of Bioresources and Bioproducts, 2019, 4 (01): : 22 - 31
[23] Evaluation of shear strength and durability of adhesive bond in cross-laminated timber (CLT) panels made from Nigerian Gmelina arborea timber
Yau, Yusuf
Ocholi, Amana
Kaura, Jibrin Mohammed
Lawan, Adamu
Sulaiman, Tasiu Ashiru
CASE STUDIES IN CONSTRUCTION MATERIALS, 2024, 21
[24] Numerical analysis of behaviour of cross laminated timber (CLT) in blast loading
Sliseris, J.
Gaile, L.
Pakrastins, L.
3RD INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (IMST 2017), 2017, 251
[25] Structural design of Cross Laminated Timber (CLT) by advanced plate theories
Stuerzenbecher, R.
Hofstetter, K.
Eberhardsteiner, J.
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (09) : 1368 - 1379
[26] Investigation of vibration behaviour of floors made of Cross Laminated Timber (CLT)
Bogensperger, T.
Fitz, M.
Hamm, P.
Schickhofer, G.
BAUINGENIEUR, 2010, 85 : 45 - 52
[27] Effects of Re-drying on properties of cross laminated timber (CLT) connections
Udele, Kenneth Emamoke
Sinha, Arijit
Morrell, Jeffrey J.
JOURNAL OF BUILDING ENGINEERING, 2023, 76
[28] Rolling Shear Strength of Cross Laminated Timber (CLT)-Testing, Evaluation, and Design
Glasner, David
Ringhofer, Andreas
Brandner, Reinhard
Schickhofer, Gerhard
BUILDINGS, 2023, 13 (11)
[29] Experimental study of truss using CLT (Cross Laminated Timber) for lower chord
Tada, Shuji
IASS 60TH ANNIVERSARY SYMPOSIUM (IASS SYMPOSIUM 2019) - 9TH INTERNATIONAL CONFERENCE ON TEXTILE COMPOSITES AND INFLATABLE STRUCTURES (STRUCTURAL MEMBRANES 2019), 2019, : 2895 - 2902
[30] Evaluation of the effect of knots on rolling shear strength of cross laminated timber (CLT)
Cao, Yawei
Street, Jason
Li, Minghao
Lim, Hyungsuk
CONSTRUCTION AND BUILDING MATERIALS, 2019, 222 : 579 - 587

← 1 2 3 4 5 →