Nanoscale structural and mechanical characterization of heat treated nacre

被引：44
|
作者：
Huang, Zaiwang [1 ]
Li, Xiaodong [1 ]
机构：
[1] Univ S Carolina, Dept Mech Engn, Columbia, SC 29208 USA
来源：
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | 2009年 / 29卷 / 06期
关键词：
Nacre; Heat treatment; Structure; Mechanical property; Hardness; Elastic modulus; DEFORMATION;
D O I：
10.1016/j.msec.2009.02.007
中图分类号：
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号：
0805 ; 080501 ; 080502 ;
摘要：
Nanoscale structural and mechanical characterization of heat treated nacre has been carried out. Two phase transformations were identified. i.e., from aragonite to calcite in the 500 degrees C heat treated nacre and from aragonite to calcium oxide (CaO) in the 1000 degrees C heat treated nacre. The brick-mortar architecture remains in the 500 degrees C heat treated nacre, but loses in the 1000 degrees C heat treated nacre. The heat treatment burned out the biopolymer in nacre. Nanoscale holes were discovered at the aragonite platelet boundaries and on the platelet surfaces. The heat treated nacre exhibits a sharp loss in elastic modulus and hardness compared with the fresh nacre. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：1803 / 1807
页数：5
相关论文
共 50 条
  • [31] THE MECHANICAL DESIGN OF NACRE
    JACKSON, AP
    VINCENT, JFV
    TURNER, RM
    PROCEEDINGS OF THE ROYAL SOCIETY SERIES B-BIOLOGICAL SCIENCES, 1988, 234 (1277): : 415 - +
  • [32] The toughening mechanism of nacre and structural materials inspired by nacre
    Kakisawa, Hideki
    Sumitomo, Taro
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2011, 12 (06)
  • [33] Nanoscale Transforming Mineral Phases in Fresh Nacre
    DeVol, Ross T.
    Sun, Chang-Yu
    Marcus, Matthew A.
    Coppersmith, Susan N.
    Myneni, Satish C. B.
    Gilbert, Pupa U. P. A.
    JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 2015, 137 (41) : 13325 - 13333
  • [34] Structural and mechanical characterization of Al-based composite reinforced with heat treated Al2O3 particles
    Hossein-Zadeh, Mohsen
    Mirzaee, Omid
    Saidi, Peyman
    MATERIALS & DESIGN, 2014, 54 : 245 - 250
  • [35] Nanoscale structural and. mechanical characterization of bamboo-like polymer/silicon nanocomposite films
    Ni, H
    Li, XD
    Gao, HS
    Nguyen, TP
    NANOTECHNOLOGY, 2005, 16 (09) : 1746 - 1753
  • [36] Advanced methods for mechanical and structural characterization of nanoscale materials for 3D IC integration
    Sander, C.
    Standke, Y.
    Niese, S.
    Rosenkranz, R.
    Clausner, A.
    Gall, M.
    Zschech, E.
    MICROELECTRONICS RELIABILITY, 2014, 54 (9-10) : 1959 - 1962
  • [37] Microstructural and mechanical characterization of postweld heat-treated thermite weld in rails
    Ilic, N
    Jovanovic, MT
    Todorovic, M
    Trtanj, M
    Saponjic, P
    MATERIALS CHARACTERIZATION, 1999, 43 (04) : 243 - 250
  • [38] Physico-mechanical characterization of heat-treated glued laminated bamboo
    Silva Brito, Flavia Maria
    Paes, Juarez Benigno
    da Silva Oliveira, Jose Tarcisio
    Chaves Arantes, Marina Donaria
    Vidaurre, Graziela Baptista
    Brocco, Victor Fassina
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 190 : 719 - 727
  • [39] A review of microelectromechanical systems for nanoscale mechanical characterization
    Zhu, Yong
    Chang, Tzu-Hsuan
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2015, 25 (09)
  • [40] Mechanical properties of heat-treated high tensile structural steel at elevated temperatures
    Xiong, Ming-Xiang
    Liew, J. Y. Richard
    THIN-WALLED STRUCTURES, 2016, 98 : 169 - 176
12345