Experimental and Numerical Study of Heat Transfer and Flow Performance in 3D-Printing Microchannel with Staggered Pin-Fins Array

被引：0

作者：

Xu, Chong ^{[1
]}

Xu, Shanglong ^{[1
]}

Huang, Dagui ^{[1
]}

机构：

[1] Univ Elect Sci & Technol China, Dept Mechatron Engn, Chengdu, Peoples R China

来源：

PROCEEDINGS OF THE SEVENTH ASIA INTERNATIONAL SYMPOSIUM ON MECHATRONICS, VOL II | 2020年 / 589卷

关键词：

3D-printing; Staggered pin-fins; Heat transfer; SINKS;

D O I：

10.1007/978-981-32-9441-7_29

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

As hydraulic resistance of microchannel is concerned, the pin-fins can reduce up to half of the hydraulic resistance of conventional microchannel. The aluminum microchannel heat sink was fabricated by 3D printing technology. The flow and heat transfer characteristics in microchannel with two pin-fins (airfoil-profile and fish-shape) were studied by numerical simulation and experiments. The results indicated that the rough surface has negative effects on flow and heat transfer. The influence on pressure drop and heat transfer weaken when the Reynolds number (Re) exceed 1000. When the Re is greater than 700, the influence obviously weakens. The Re and the heat flux have a certain effect on the heat transfer performance when the Re is in the different ranges. Results from this study can help inform the design and rapid printing of compact cold plate antenna and LED.

引用

页码：286 / 299

页数：14

共 50 条

[21] Numerical shape optimization for high performance of a heat sink with pin-fins
Park, Kyoungwoo
Choi, Dong-Hoon
Lee, Kwan-Soo
Numer Heat Transfer Part A Appl, 1600, 9 (909-927):
[22] Numerical shape optimization for high performance of a heat sink with pin-fins
Park, K
Choi, DH
Lee, KS
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2004, 46 (09) : 909 - 927
[23] Thermal and hydraulic performance investigation of microchannel heat sink with sidewall square pin-fins
Alnaimat, Fadi
Rahhal, Ahmad
Mathew, Bobby
RESULTS IN ENGINEERING, 2024, 21
[24] Effects of heat loads on flow and heat transfer in the entrance region of a cooling duct with a staggered array of pin fins
Lee, Chien-Shing
Shih, Tom I-Ping
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 175
[25] Numerical investigation on flow and heat transfer of beveled pin-fins based on airfoil profile in a cooling channel
Jia N.
Jin W.
Wu J.
Lei J.
Ji W.
Hangkong Dongli Xuebao/Journal of Aerospace Power, 2021, 36 (01): : 61 - 69
[26] Effect of the number of periodic module on flow and heat transfer in a periodic array of cubic pin-fins inside a channel
Saha, Arun K.
JOURNAL OF ENHANCED HEAT TRANSFER, 2008, 15 (03) : 243 - 260
[27] Multi-objective optimization of a rotating cooling channel with staggered pin-fins for heat transfer augmentation
Moon, Mi-Ae
Husain, Afzal
Kim, Kwang-Yong
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 2012, 68 (07) : 922 - 938
[28] Flow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel
Krishnamurthy, Santosh
Peles, Yoav
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (04): : 1 - 10
[29] The influences of sidewall proximity on flow and thermal performance of a microchannel with large-row pin-fins
Xie, Jingzhe
Yan, Hongbin
Sunden, Bengt
Xie, Gongnan
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 140 : 8 - 19
[30] AN EXPERIMENTAL STUDY OF TRANSITIONAL FLOW FRICTION AND HEAT TRANSFER PERFORMANCE OF A CHANNEL WITH STAGGERED ARRAYS OF MINI-SCALE SHORT PIN FINS
Rao, Yu
Wan, Chaoyi
Zang, Shusheng
PROCEEDINGS OF THE ASME TURBO EXPO 2009, VOL 3, PTS A AND B, 2009, : 277 - 285

← 1 2 3 4 5 →