Effect of helium irradiation on Ti3AlC2 at 500 °C

被引：53

作者：

Patel, Maulik K. ^{[1
]}

Tallman, Darin J. ^{[3
]}

Valdez, James A. ^{[2
]}

Aguiar, Jeffery ^{[2
]}

Anderoglu, Osman ^{[2
]}

Tang, Ming ^{[2
]}

Griggs, Justin ^{[3
]}

Fu, Engang ^{[2
]}

Wang, Yongqiang ^{[2
]}

Barsoum, Michel W. ^{[3
]}

机构：

[1] Univ Tennessee, Dept Mat Sci & Engn, Knoxville, TN 37996 USA

[2] Los Alamos Natl Lab, Mat Sci & Technol Div, Los Alamos, NM 87545 USA

[3] Drexel Univ, Dept Mat Sci & Engn, Philadelphia, PA 19104 USA

来源：

SCRIPTA MATERIALIA | 2014年 / 77卷

关键词：

MAX-phase; He accumulation; XRD; Radiation damage; Ion irradiation; HEAVY-IONS; TI3SIC2; DAMAGE; TEMPERATURE; RADIATION; TOLERANCE;

D O I：

10.1016/j.scriptamat.2013.12.010

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

We report herein, for the first time, the effects of high-fluence (2 x 10(17) ions cm(-2); 14 at.%) helium irradiation of polycrystalline Ti3AlC2 samples at 500 degrees C. X-ray diffraction (XRD) confirmed that, despite swelling along the c-axis and shrinkage along the a-axis, the basic building blocks, viz. the Ti3C2 layers, remained intact after irradiation. The XRD results also suggest that He implantation disorders the Al layers. Despite the high dose at 500 degrees C, He bubbles are present and are less than 1 nm in diameter. This is an important finding if this material is to be used in light water or other fission reactors in the future. (C) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：1 / 4

页数：4

共 50 条

[31] Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis
Liu, Guanghua
Chen, Kexin
Zhou, Heping
Guo, Junming
Ren, Kegang
Ferreira, J. M. F.
MATERIALS LETTERS, 2007, 61 (03) : 779 - 784
[32] Ti2AlC/TiAl Composites with Doped Ti3AlC2 by SPS
Wang Wei
Ai Taotao
Fei Yanhan
RARE METAL MATERIALS AND ENGINEERING, 2017, 46 : 1 - 4
[33] Electronic structures and bonding properties of Ti2AlC and Ti3AlC2
Xinmin Min
Yi Ren
Journal of Wuhan University of Technology-Mater. Sci. Ed., 2007, 22 : 27 - 30
[34] Effect of Ti3AlC2 Content on Electrical Friction and Wear Behaviors of Cu-Ti3AlC2 Composites
Zhao, Hao
Feng, Yi
Qian, Gang
Huang, Xiaochen
Guo, Shenshen
Sun, Xiaoyan
TRIBOLOGY LETTERS, 2019, 67 (03)
[35] Corrosion behavior of Ti3AlC2 in molten KOH at 700 °C
Sun, Dandan
Zhou, Aiguo
Li, Zhengyang
Wang, Libo
JOURNAL OF ADVANCED CERAMICS, 2013, 2 (04) : 313 - 317
[36] Tribological behaviors and mechanisms of Ti3AlC2
Huang, Zhenying
Zhai, Hongxiang
Zhou, Wei
Liu, Xin
Ai, Mingxing
TRIBOLOGY LETTERS, 2007, 27 (02) : 129 - 135
[37] Effect of Ti3AlC2 MAX Phase on Structure and Properties of Resultant Ti3C2Tx MXene
Shuck, Christopher E.
Han, Meikang
Maleski, Kathleen
Hantanasirisakul, Kanit
Kim, Seon Joon
Choi, Junghoon
Reil, William E. B.
Gogotsi, Yury
ACS APPLIED NANO MATERIALS, 2019, 2 (06) : 3368 - 3376
[38] Kinetics of Ti3AlC2 Etching for Ti3C2TX MXene Synthesis
Anayee, Mark
Shuck, Christopher E.
Shekhirev, Mikhail
Goad, Adam
Wang, Ruocun
Gogotsi, Yury
CHEMISTRY OF MATERIALS, 2022, 34 (21) : 9589 - 9600
[39] Pressureless Sintering and Properties of Ti3AlC2
Lu, Xinpo
Zhou, Yanchun
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2010, 7 (06) : 744 - 751
[40] A possible mechanism on synthesis of Ti3AlC2
Zhou, AG
Wang, CA
Huang, Y
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 352 (1-2): : 333 - 339

← 1 2 3 4 5 →