Microstructure and Properties of Ni/Al2O3 Composites Prepared by Powder Injection Molding

被引：1
|
作者：
Shang, Feng [1 ,2 ,3 ]
Cao, Zhenwei [4 ]
Zhang, Peng [1 ]
Qiao, Bin [1 ]
Li, Huaqiang [1 ]
机构：
[1] Huaihai Inst Technol, Sch Mech Engn, 59 Cangwu Rd Haizhou Dist, Lianyungang 222005, Jiangsu, Peoples R China
[2] Marine Resources Dev Inst Jiangsu, 108 Tongguan South Rd Haizhou Dist, Lianyungang 222001, Jiangsu, Peoples R China
[3] Xuzhou Inst Technol, Jiangsu Key Lab Large Engn Equipment Detect & Con, 1 Fuchun Rd Xincheng Dist, Xuzhou 221111, Jiangsu, Peoples R China
[4] China Univ Min & Technol, Sch Mech & Elect Engn, 1 Daxue Rd, Xuzhou 221116, Jiangsu, Peoples R China
来源：
2018 2ND INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES IN MANUFACTURING AND MATERIALS ENGINEERING (ATMME 2018) | 2018年 / 389卷
关键词：
MECHANICAL-PROPERTIES;
D O I：
10.1088/1757-899X/389/1/012022
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ni/Al2O3 composite was prepared by powder injection molding, the effects of Ni content and different sintering process on the microstructure and mechanical properties of Ni/Al2O3 composites were studied. The results show that when the Ni content is 10%, the comprehensive performance of Ni/Al2O3 composite is better. The optimum vacuum sintering process of 10% Ni/Al2O3 composite is as follows: sintering temperature of 1500 degrees C for 1 hour, with the relative density of 96.7%, bending strength of 312 MPa, Vickers hardness of 1528HV and fracture toughness of 5.3 MPa.m(1/2).
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Impact of high Al2O3 content on the microstructure, mechanical properties, and wear behavior Al-Cu-Mg/Al2O3 composites prepared by mechanical milling
    Beder, Murat
    Varol, Temel
    Akcay, Serhatcan Berk
    CERAMICS INTERNATIONAL, 2024, 50 (20) : 38610 - 38631
  • [42] Microstructure of in-situ Al2O3/Al composites
    Ji, Y
    Zhong, TX
    Wang, Y
    Tang, JH
    Xu, XD
    JOURNAL OF TRACE AND MICROPROBE TECHNIQUES, 1997, 15 (04): : 489 - 492
  • [43] Effects of Al2O3 Nanoparticle on the Microstructure and Magnetic Properties of Co/Al2O3 Coatings Prepared by Composite Plating
    Wang, Sheng-Chang
    Tseng, Chih-Hsiung
    ENGINEERING MATERIALS III, 2008, 51 : 131 - 139
  • [44] Microstructure and mechanical properties of Al2O3/SiC nanocomposites prepared by SPS
    Li, RT
    Pan, W
    Pan, ZX
    HIGH-PERFORMANCE CERAMICS 2001, PROCEEDINGS, 2002, 224-2 : 337 - 340
  • [45] Microstructure and mechanical properties of Al2O3/ZrO2 eutectic ceramic composites prepared by explosion synthesis
    Zheng, Yongting
    Li, Hongbo
    Zhou, Tao
    Zhao, Jing
    Yang, Pan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 551 : 475 - 480
  • [46] Microstructure and Mechanical Properties of κ-Al2O3/TiCN Coating Prepared by CVD
    Qi, Zheng-bing
    Sun, Peng
    Wang, Zhou-cheng
    Wu, Chong-hu
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 1766 - +
  • [47] Effect of α-Al2O3 coatings on the interface of Ni/SiC composites prepared by electrodeposition
    Wu, Zhong
    Shen, Bin
    Liu, Lei
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (14): : 3173 - 3178
  • [48] Properties of Al/Al2O3-TiO2 composites prepared by powder metallurgy processing
    Aydin, H.
    Birgin, P. C. Tokat
    KOVOVE MATERIALY-METALLIC MATERIALS, 2021, 59 (02): : 99 - 107
  • [49] Injection moulding of SiCw/Al2O3 composites
    Wong, TL
    Li, RKY
    Wu, CML
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 63 (1-3) : 399 - 404
  • [50] Influence of Al2O3 addition on microstructure and mechanical properties of 3YSZ-Al2O3 composites
    Abden, Jaynul
    Afroze, Jannatul Dil
    Gafur, Abdul
    Chowdhury, Faruque-Uz-Zaman
    MATERIALS TESTING, 2015, 57 (06) : 499 - 505
12345