Structural optimization and hydraulic performance analysis of bionic pit flow channels based on a genetic algorithm

被引:3
|
作者
Xu, Tianyu [1 ]
Su, Yanru [1 ]
Su, Zhouming [1 ]
Zhi, Shuteng [1 ]
Zheng, Ennan [1 ]
机构
[1] Heilongjiang Univ, Sch Hydraul & Elect Power, Harbin 150080, Peoples R China
关键词
D O I
10.1038/s41598-022-26569-1
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
Orthogonal experiments have mostly been used in the structural optimization of drip irrigation emitter flow channels. To further improve the efficiency of the optimal design, this study used a genetic algorithm to optimize the structure of the bionic pit flow channel. Based on the structural similarity and performance optimization of the torus-margo bordered pit structure, the constitutive equation of the flow channel unit was constructed. The selection, crossover and mutation operators were set by the genetic algorithm, and the objective function value was calculated. The design variables and known variables that met the requirements were put into the computational domain model, and the pit flow channel structure was simulated and optimized. The results showed that there were large low-velocity regions at the junctions and corners of the pit flow channel units at a working pressure of 50 kPa, and no complete low-velocity vortices were observed, indicating that the flow channels had good anti-clogging performance. The distribution of flow velocity on the same cross-section was quite different, which made the flow layers collide and mix, which intensified the loss of energy, indicating that it had a good energy dissipation effect. The multivariate linear regression analysis showed that the four variables of tooth stagger value (j), flow channel angle (theta), tooth spacing (l) and inner and outer boundary spacing (h) had a decreasing degree of influence on the flow index (x). The flow index (x) was negatively correlated with the tooth stagger value (j), flow channel angle (theta) and tooth spacing (l), and positively correlated with the inner and outer boundary spacing (h). The test results of physical samples showed that the average error between the simulation results and the real values was 3.4%, indicating that the accuracy was high, which can provide a basis for the structural optimization design of related pit drip irrigation emitters.
引用
收藏
页数:12
相关论文
共 50 条
  • [1] Structural optimization and hydraulic performance analysis of bionic pit flow channels based on a genetic algorithm
    Tianyu Xu
    Yanru Su
    Zhouming Su
    Shuteng Zhi
    Ennan Zheng
    Scientific Reports, 12
  • [2] Optimization for the hydraulic performance of centrifugal blade based on the genetic algorithm
    Tian H.
    Sun X.
    Guo T.
    Li G.
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2010, 41 (05): : 64 - 67+119
  • [3] Numerical analysis of hydraulic properties of bionic nozzles and structural optimization based on CFD-FEA
    Jiang, Shengqun
    Yue, Jixiang
    Liu, Yancong
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [4] Optimization of Hydraulic Calculation Simulation Based on Genetic Algorithm
    Xiao, Lei
    Liu, Kejiang
    Zhuang, Xincai
    2017 13TH INTERNATIONAL CONFERENCE ON NATURAL COMPUTATION, FUZZY SYSTEMS AND KNOWLEDGE DISCOVERY (ICNC-FSKD), 2017, : 1040 - 1044
  • [5] Structural optimization and flow field analysis of turbomolecular pump based on a new performance prediction algorithm
    Sun, Kun
    Deng, Haishun
    Wang, Cheng
    Zhang, Shiwei
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [6] Hydraulic Optimization of Multiphase Pump Based on CFD and Genetic Algorithm
    Hu Hao
    Li Xinkai
    Gu Bo
    INTERNATIONAL JOURNAL OF GRID AND DISTRIBUTED COMPUTING, 2015, 8 (06): : 161 - 169
  • [7] Parameter Optimization of Hydraulic Hybrid Vehicle Based on Genetic Algorithm
    Liu Tao
    Ju Xuezhen
    APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3, 2010, 29-32 : 1079 - 1084
  • [8] Knee joint optimization design of intelligent bionic leg based on genetic algorithm
    Li, Fei (lifeisut@163.com), 1600, Institute of Biophysics and Biomedical Engineering (18):
  • [9] A Simulative Bionic Intelligent Optimization Algorithm: Artificial Searching Swarm Algorithm and Its Performance Analysis
    Chen, Tanggong
    INTERNATIONAL JOINT CONFERENCE ON COMPUTATIONAL SCIENCES AND OPTIMIZATION, VOL 2, PROCEEDINGS, 2009, : 864 - 866
  • [10] Structural topology optimization based on improved genetic algorithm
    Qu Dongyue
    Huang Yangyang
    Song Jinyu
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING AND INFORMATION TECHNOLOGY APPLICATIONS, 2015, 28 : 989 - 994