Analysis of semi-volatile residues using Diffuse Reflectance Infrared Fourier Transform Spectroscopy

Semi-volatile residues on aerospace hardware can be analyzed using Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). This method can be correlated with quantitative Mil-STD 1246 NVR measurements while simultaneously providing qualitative identification of a large variety of compounds. Its high sensitivity supports the direct sampling of small areas of critical surfaces. This method involves transferring the contaminant film to a small solvent-saturated wipe, followed by extraction of the wipe, then concentration of the solvent extract and subsequent spectroscopic analysis using an FT-IR with a diffuse reflectance accessory. A library of standard curves for different classes of typical aerospace contan-dnants has been established. Quantitative analysis has been proven successful over orders of magnitude and detection limits exceeding 0.1 ug/cm(2) are routinely achieved. Several practical applications have been performed using this analytical method and detailed discussion of analysis techniques is presented. The discussion will include: instrumentation setup, selection and preparation of sample collection materials, sample extract preparation, preparation of standard calibration curves and spectral interpretation.