Comparing Properties of North American Manufactured Particleboard and Medium Density Fiberboard - Part II: Medium Density Fiberboard

被引：0

作者：

Dettmer, Joern ^{[1
]}

Smith, Gregory D. ^{[1
]}

机构：

[1] Univ British Columbia, Dept Wood Sci, Vancouver, BC V6T 1Z4, Canada

来源：

BIORESOURCES | 2015年 / 10卷 / 03期

关键词：

Medium density fiberboard; Internal bond; Mechanical properties; Thickness swell; Linear expansion; Vertical density profile; Screw withdrawal; Survey;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

The properties of medium density fiberboard (MDF) derived from different manufacturing plants were compared. Each plant provided 5 full-sized (2440 by 1220 mm) 155-grade panels that were tested according to ANSI A208.2-2009. None of the panels met the recommended value for Internal Bond (IB). Mean values for Thickness Swell (TS) were all significantly different, with one manufacturer below the standard. Three manufacturers exceeded the recommended face Screw Withdrawal Resistance (fSWR) values, one was equal to it, and one failed. Three manufacturers exceeded the edge SWR (eSWR) standard, and the remaining two fell below. Two manufacturers met the standard for Modulus of Rupture (MOR), and only one manufacturer failed to meet the Modulus of Elasticity (MOE) requirements. Linear Expansion (LE) was evaluated for a RH change from 50 to 90%. The panels made with pMDI-resin consistently had some of the highest mean values for MOR, MOE, fSWR, and IB and exhibited good performance in the TS test.

引用

页码：6032 / 6043

页数：12

共 50 条

[41] Sanding force of wood and medium density fiberboard
Li Li
Liu Bo
Yang Yongfu
Wang Mingzhi
PROCEEDINGS OF THE 19TH INTERNATIONAL WOOD MACHINING SEMINAR, 2009, : 319 - 326
[42] Cost-Benefit Analysis of Medium-Density Fiberboard Production by Adding Fiber from Recycled Medium-Density Fiberboard
Adeeb, Ehsan
Kim, Tae Woo
Sohn, Chang Hyun
FOREST PRODUCTS JOURNAL, 2018, 68 (04) : 414 - 418
[43] Durability of Medium Density Fiberboard Subjected to Outdoor Exposure
Korai, Hideaki
MOKUZAI GAKKAISHI, 2012, 58 (06): : 347 - 356
[44] INFLUENCE OF DEPENDENT-VARIABLES ON THE PROPERTIES OF MEDIUM-DENSITY FIBERBOARD
SUZUKI, M
KATO, T
MOKUZAI GAKKAISHI, 1989, 35 (01): : 8 - 13
[45] Influence of compression wood on physical and mechanical properties of medium density fiberboard
Akbulut, T
Ayrilmis, N
Koc, E
WOOD RESEARCH, 2004, 49 (03) : 17 - 24
[46] Physical Properties of Medium Density Fiberboard Produced with the Addition of ZnO Nanoparticles
Santos da Silva, Ana Paula
Ferreira, Bruno Santos
Favarim, Higor Rogerio
Felippe Silva, Maria Fernando
Felippe Silva, Joao Vitor
Azambuja, Maximiliano dos Anjos
de Campos, Cristiane Inacio
BIORESOURCES, 2019, 14 (01): : 1618 - 1625
[47] An air emission database for particleboard, medium density fiberboard, oriented strandboard, and softwood plywood mills
Word, DH
1996 INTERNATIONAL ENVIRONMENTAL CONFERENCE BOOKS 1 AND 2: PARTNERS IN GLOBAL STEWARDSHIP, 1996, : 489 - 491
[48] Ravonier to build medium-density fiberboard plant
TAPPI Journal, 1994, 77 (08):
[49] Medium density fiberboard made from Eucalyptus saligna
Krzysik, AM
Muehl, JH
Youngquist, JA
Franca, FS
FOREST PRODUCTS JOURNAL, 2001, 51 (10) : 47 - 50
[50] Challenges for recycling medium-density fiberboard (MDF)
Zimmer, Andre
Bachmann, Suyanne Angie Lunelli
RESULTS IN ENGINEERING, 2023, 19

← 1 2 3 4 5 →