Comparing Properties of North American Manufactured Particleboard and Medium Density Fiberboard - Part II: Medium Density Fiberboard

被引：0

作者：

Dettmer, Joern ^{[1
]}

Smith, Gregory D. ^{[1
]}

机构：

[1] Univ British Columbia, Dept Wood Sci, Vancouver, BC V6T 1Z4, Canada

来源：

BIORESOURCES | 2015年 / 10卷 / 03期

关键词：

Medium density fiberboard; Internal bond; Mechanical properties; Thickness swell; Linear expansion; Vertical density profile; Screw withdrawal; Survey;

D O I：

暂无

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

The properties of medium density fiberboard (MDF) derived from different manufacturing plants were compared. Each plant provided 5 full-sized (2440 by 1220 mm) 155-grade panels that were tested according to ANSI A208.2-2009. None of the panels met the recommended value for Internal Bond (IB). Mean values for Thickness Swell (TS) were all significantly different, with one manufacturer below the standard. Three manufacturers exceeded the recommended face Screw Withdrawal Resistance (fSWR) values, one was equal to it, and one failed. Three manufacturers exceeded the edge SWR (eSWR) standard, and the remaining two fell below. Two manufacturers met the standard for Modulus of Rupture (MOR), and only one manufacturer failed to meet the Modulus of Elasticity (MOE) requirements. Linear Expansion (LE) was evaluated for a RH change from 50 to 90%. The panels made with pMDI-resin consistently had some of the highest mean values for MOR, MOE, fSWR, and IB and exhibited good performance in the TS test.

引用

页码：6032 / 6043

页数：12

共 50 条

[1] Comparing Properties of North American Manufactured Particleboard and Medium Density Fiberboard - Part I: Particleboard
Dettmer, Joern
Smith, Gregory D.
BIORESOURCES, 2015, 10 (03): : 6014 - 6031
[2] Comparing properties of North American manufactured particleboard and medium density fiberboard - Part I: Particleboard
Department of Wood Science, The University of British Columbia, 2935-2424 Main Mall, Vancouver
BC
V6T 1Z4, Canada
BioResour., 3 (6014-6031):
[3] North American medium density fiberboard blending technology
Smith, DC
1998 RESIN & BLENDING SEMINAR PROCEEDINGS, 1999, : 71 - 77
[4] Evaluation of surface roughness of commercially manufactured particleboard and medium density fiberboard in Japan
Hiziroglu, Salim
Suzuki, Shigehiko
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 184 (1-3) : 436 - 440
[5] PMDI for use in medium density fiberboard and particleboard applications
Abbott, AL
Larimer, D
1998 RESIN & BLENDING SEMINAR PROCEEDINGS, 1999, : 157 - 161
[6] COMPARATIVE INVESTIGATIONS BETWEEN MEDIUM DENSITY FIBERBOARD AND PARTICLEBOARD
GRIGORIOU, A
HOLZ ALS ROH-UND WERKSTOFF, 1983, 41 (05) : 183 - 186
[7] ON THE MEASUREMENT OF LINEAR EXPANSION OF PARTICLEBOARD AND MEDIUM DENSITY FIBERBOARD
SUCHSLAND, O
XU, H
FOREST PRODUCTS JOURNAL, 1989, 39 (06) : 39 - 42
[8] VARIATION IN THE PROPERTIES OF MEDIUM DENSITY FIBERBOARD
WINISTORFER, PM
MOSCHLER, WW
FOREST PRODUCTS JOURNAL, 1989, 39 (05) : 39 - 42
[9] SURFACE TESTING OF PARTICLEBOARD AND MEDIUM DENSITY FIBERBOARD FOR LAMINATING APPLICATIONS
HOAG, M
TAPPI JOURNAL, 1992, 75 (10): : 116 - 121
[10] Aldehyde emissions from particleboard and medium density fiberboard products
Baumann, MGD
Lorenz, LF
Batterman, SA
Zhang, GZ
FOREST PRODUCTS JOURNAL, 2000, 50 (09) : 75 - 82

← 1 2 3 4 5 →