Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature

被引：73
|
作者：
Zhang, Xiaohua [1 ]
Liu, Daoxin [1 ]
机构：
[1] NW Polytech Univ, Corros & Protect Res Lab, Xian 710072, Peoples R China
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2009年 / 31卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Titanium alloy; Fretting fatigue; Shot peening; Elevated temperature; Residual stress; TI-6AL-4V; COATINGS; ENGINE;
D O I：
10.1016/j.ijfatigue.2008.10.004
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effects of compressive residual stress, surface roughness, microstructure hardening induced by shot peening (SP) on the fretting fatigue (FF) resistance of Ti811 titanium alloy at elevated temperature were evaluated. The results show that SP improves the FF resistance of Ti811 alloy at 350 degrees C, but decreases the resistance at 500 degrees C. Compressive residual stress is the predominant factor in improving the FF resistance of the alloy at 350 degrees C. Compressive residual stress induced by SIR arrests crack growth. Microstructure hardening due to SP has a minor effect on FF resistance. Surface roughening induced by SP is detrimental to the FF resistance of the alloy at both 350 and 500 degrees C, as microcracks initiate easily in the roughened surface under these conditions. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：889 / 893
页数：5
相关论文
共 50 条
  • [31] Influence of shot peening on fatigue property of Ti-60 high temperature titanium alloy
    Gao, Y. K.
    SURFACE ENGINEERING, 2007, 23 (06) : 431 - 433
  • [32] The effects of laser peening and shot peening on fretting fatigue in Ti-6Al-4V coupons
    Liu, Kevin K.
    Hill, Michael R.
    TRIBOLOGY INTERNATIONAL, 2009, 42 (09) : 1250 - 1262
  • [33] Finite element analysis of shot-peening effect on fretting fatigue parameters
    H-Gangaraj, S. M.
    Alvandi-Tabrizi, Y.
    Farrahi, G. H.
    Majzoobi, G. H.
    Ghadbeigi, H.
    TRIBOLOGY INTERNATIONAL, 2011, 44 (11) : 1583 - 1588
  • [34] Effect of microstructure on hot-salt stress corrosion behavior of Ti811 alloy
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 1996, 25 (05): : 34 - 39
  • [35] Fretting Fatigue Improvement of Ti6Al4V by Coating and Shot Peening
    Daoxin LIU
    JournalofMaterialsScience&Technology, 2005, (02) : 246 - 250
  • [36] Fretting fatigue improvement of Ti6Al4V by coating and shot peening
    Liu, DX
    Zhu, XD
    Tang, B
    He, JW
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (02) : 246 - 250
  • [37] Effect of Shot Peening and High-Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy
    Sadallah, Abouthaina
    Miao, Hong-Yan
    Changeux, Benoit
    Bitar-Nehme, Elie
    Chakraborty, Apratim
    Turenne, Sylvain
    Martin, Etienne
    LIGHT METALS 2024, 2024, : 171 - 176
  • [38] FRETTING FATIGUE - AN INTEGRAL SIMULATION APPROACH TO STRENGTHENING BY SHOT PEENING
    Gerken, Patrick
    Richter, Christoph H.
    PROCEEDINGS OF ASME TURBO EXPO 2021: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 9B, 2021,
  • [39] Microstructures and properties of laser cladding coating on Ti811 alloy surface
    Liu, Ya-Nan
    Sun, Rong-Lu
    Zhang, Twn-Gang
    Niu, Wei
    Surface Technology, 2019, 48 (02): : 123 - 132
  • [40] Effects of Shot Peening on Fretting Fatigue Crack Initiation Behavior
    Liu, Xin
    Liu, Jinxiang
    Zuo, Zhengxing
    Zhang, Huayang
    MATERIALS, 2019, 12 (05)
12345