Microstructure and hardness of Steel/Ni-TiC composite produced by compaction and sintering

被引：2
|
作者：
Camagu, S. T. [1 ,2 ]
Motaung, D. E. [3 ,4 ]
Bolokang, A. S. [1 ,2 ]
Arendse, C. J. [1 ]
机构：
[1] Univ Western Cape, Dept Phys, POB 339,Private Bag X 17, ZA-7535 Bellville, South Africa
[2] CSIR, Adv Mat & Engn, Mat Sci & Mfg, Meiring Naude Rd,POB 395, Pretoria, South Africa
[3] Univ Free State, Dept Phys, POB 339, ZA-9300 Bloemfontein, South Africa
[4] Univ Limpopo, Dept Phys, Private Bag X1106, ZA-0727 Sovenga, South Africa
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 38卷
关键词：
Composite; Steel/Ni; TiC; Phase transformation; Interface;
D O I：
10.1016/j.matpr.2020.02.401
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Steel/Ni reinforced with 1.0-1.5 wt% TiC composite material was developed by compaction and sintering processes. Optical microscopy and Zeiss-Auriga field-emission scanning electron microscope (FE-SEM) revealed that the TiC particles segregated around the spherical Steel/Ni grains. Moreover, the 1.0 wt % TiC- Steel/Ni composite has the FCC Steel/Ni matrix while the 1.5 wt% TiC- Steel/Ni composite is comprised of the BCC Steel/Ni phase. The large TiC grains were found mostly on the 1.0 wt% TiC- Steel/Ni composite. Additionally, the 1.5 wt% TiC-Steel/Ni composite was composed of the ultrafine TiC grains that surrounded the FeNi spherical grains. The FCC Steel/Ni (1.0 wt% TiC)) composite has lower average hardness compared to the B2 Steel/Ni (1.5 wt% TiC) phase. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：553 / 557
页数：5
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing
    Ghasemi-Kahrizsangi, Ahmad
    Kashani-Bozorg, Seyed Farshid
    SURFACE & COATINGS TECHNOLOGY, 2012, 209 : 15 - 22
  • [32] Fracture toughness of a hot work tool steel-TiC composite produced by mechanical milling and spark plasma sintering
    Henschel, Sebastian
    Kietov, Volodymyr
    Deirmina, Faraz
    Pellizzari, Massimo
    Krueger, Lutz
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 709 : 152 - 159
  • [33] Sintering Behavior and Microstructure of TiC-Me Composite Powder Prepared by SHS
    Korosteleva, Elena N.
    Korzhova, Victoria V.
    Krinitcyn, Maksim G.
    METALS, 2017, 7 (08):
  • [34] Microstructure and properties of TiC/NiCr cermets produced by partial liquid-phase sintering
    Liu, Y
    Yu, BH
    Guan, DH
    Wang, ZB
    Bi, J
    JOURNAL OF MATERIALS SCIENCE LETTERS, 2001, 20 (07) : 619 - 620
  • [35] Microstructure and mechanical properties of in situ produced TiC/C nanocomposite by spark plasma sintering
    Li, JL
    Wang, LJ
    Bai, GZ
    Jiang, W
    SCRIPTA MATERIALIA, 2005, 52 (09) : 867 - 871
  • [36] Microstructure and mechanical properties of TiC-Ni coating on AISI304 steel produced by TIG cladding process
    Sahoo, Chinmaya Kumar
    Masanta, Manoj
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 240 : 126 - 137
  • [37] ENHANCING HARDNESS AND WEAR RESISTANCE OF ZrSiO4-SnO2/Cu10Sn COMPOSITE PRODUCED BY WARM COMPACTION AND SINTERING
    Wahyudie, I. A.
    Soenoko, R.
    Suprapto, W.
    Irawan, Y. S.
    METALURGIJA, 2020, 59 (01): : 27 - 30
  • [38] Microstructure evolution, enhanced hardness and toughness in the solid-solution ceramic composite by reaction pressureless sintering of ZrB2 and TiC powders
    Kong, Qingyi
    Huo, Sijia
    Chen, Lei
    Wang, Yujin
    Ouyang, Jiahu
    Zhou, Yu
    CERAMICS INTERNATIONAL, 2022, 48 (12) : 17981 - 17986
  • [39] Microstructure and abrasive behaviors of TiC-316L composites prepared by warm compaction and microwave sintering
    Lin, Shaojiang
    Xiong, Weihao
    ADVANCED POWDER TECHNOLOGY, 2012, 23 (03) : 419 - 425
  • [40] Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers
    Gorji, M. R.
    Edtmaier, C.
    Sanjabi, S.
    MATERIALS & DESIGN, 2017, 125 : 167 - 179
12345