Microstructure and hardness of Steel/Ni-TiC composite produced by compaction and sintering

被引：2
|
作者：
Camagu, S. T. [1 ,2 ]
Motaung, D. E. [3 ,4 ]
Bolokang, A. S. [1 ,2 ]
Arendse, C. J. [1 ]
机构：
[1] Univ Western Cape, Dept Phys, POB 339,Private Bag X 17, ZA-7535 Bellville, South Africa
[2] CSIR, Adv Mat & Engn, Mat Sci & Mfg, Meiring Naude Rd,POB 395, Pretoria, South Africa
[3] Univ Free State, Dept Phys, POB 339, ZA-9300 Bloemfontein, South Africa
[4] Univ Limpopo, Dept Phys, Private Bag X1106, ZA-0727 Sovenga, South Africa
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 38卷
关键词：
Composite; Steel/Ni; TiC; Phase transformation; Interface;
D O I：
10.1016/j.matpr.2020.02.401
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Steel/Ni reinforced with 1.0-1.5 wt% TiC composite material was developed by compaction and sintering processes. Optical microscopy and Zeiss-Auriga field-emission scanning electron microscope (FE-SEM) revealed that the TiC particles segregated around the spherical Steel/Ni grains. Moreover, the 1.0 wt % TiC- Steel/Ni composite has the FCC Steel/Ni matrix while the 1.5 wt% TiC- Steel/Ni composite is comprised of the BCC Steel/Ni phase. The large TiC grains were found mostly on the 1.0 wt% TiC- Steel/Ni composite. Additionally, the 1.5 wt% TiC-Steel/Ni composite was composed of the ultrafine TiC grains that surrounded the FeNi spherical grains. The FCC Steel/Ni (1.0 wt% TiC)) composite has lower average hardness compared to the B2 Steel/Ni (1.5 wt% TiC) phase. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：553 / 557
页数：5
相关论文
共 50 条
  • [1] Effect of TiC Particles Concentration on Microstructure and Properties of Ni-TiC Composite Coatings
    Ma, Min
    Sun, Wan-chang
    Zhang, Ya-gang
    Liu, Xiao-jia
    Dong, Ya-ru
    Zi, Jin-yu
    Xiao, Yan
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (06):
  • [2] Effect of Ni-TiC composite film coating on fretting fatigue of high strength steel
    Nakazawa, K
    Takei, A
    Kasahara, K
    Ishida, A
    Sumita, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1995, 59 (11) : 1118 - 1123
  • [3] Obtaining the Ni-TiC composite powder by the carbidization of titanium nickelide
    A. V. Kasimtsev
    Yu. V. Levinskii
    V. V. Zhigunov
    Russian Journal of Non-Ferrous Metals, 2009, 50 : 270 - 275
  • [4] Synthesis of Ni-TiC composite powder electrochemically in molten chlorides
    Song, Qiushi
    Xu, Qian
    Xu, Liang
    Ning, Zhiqiang
    Lou, Taiping
    Xie, Hongwei
    Qi, Yang
    Yu, Kai
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 690 : 116 - 122
  • [5] Obtaining the Ni-TiC composite powder by the carbidization of titanium nickelide
    Kasimtsev, A. V.
    Levinskii, Yu. V.
    Zhigunov, V. V.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2009, 50 (03) : 270 - 275
  • [6] New procedure for electrochemical production of Ni-TiC composite powder
    Asadi, A.
    Zandrahimi, M.
    Ebrahimi-Kahrizsangi, R.
    Saidi, A.
    Seyedalangi, S. M.
    POWDER METALLURGY, 2010, 53 (01) : 47 - 50
  • [7] Effect of Compaction Pressure Applied to TiC Reactants on the Microstructure and Properties of Composite Zones Produced In Situ in Steel Castings
    Olejnik, Ewa
    Sikora, Gabriela
    Sobula, Sebastian
    Tokarski, Tomasz
    Grabowska, Beata
    METALLOGRAPHY XV, 2014, 782 : 527 - +
  • [8] Size distribution of titanium-carbide grains in the liquid-phase sintering of Ni-TiC composite
    Gurevich Y.G.
    Steel in Translation, 2008, 38 (7) : 528 - 530
  • [9] THE STRUCTURE OF Ni-TiC COMPOSITE COATINGS DEPOSITED BY PPTAW METHOD
    Bober, Mariusz
    Grzes, Jaroslaw
    COMPOSITES THEORY AND PRACTICE, 2015, 15 (02): : 72 - 77
  • [10] Synthesis of Ni-TiC composite powder electrochemically in molten chlorides
    Xu, Qian (qianxu@shu.edu.cn), 1600, Elsevier Ltd (690):
12345