Influence of blank holding force on stretch flange forming of aluminum alloy

被引：5
|
作者：
Dewang, Yogesh [1 ]
Hora, M. S. [2 ]
Panthi, S. K. [3 ]
机构：
[1] Maulana Azad Natl Inst Technol, Dept Mech Engn, Bhopal 462051, India
[2] Maulana Azad Natl Inst Technol, Dept Civil Engn, Bhopal 462051, India
[3] Adv Mat Proc & Res Inst, Comp Simulat & Design Ctr, Bhopal 462064, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期
关键词：
Stretch flanging; blank holding force; finite element simulation; punch load; aluminum alloy; SIMULATION; SHEET;
D O I：
10.1016/j.matpr.2015.07.157
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of blank holding force on the stretch flanging process was investigated using finite element simulation and experimental analysis. Finite element model was used to study the effect of blank holding forces on punch load and forming kinematics. An aluminum alloy 5052 sheet of 0.5 mm thickness was employed for this work. Blank holding force has a great effect on punch load and significant influence on forming kinematics. Validation of FEM results were obtained by conducting experiments. A very good agreement was obtained between FEM simulation results in terms of punch load and final shape which shows the accuracy of present finite element model. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1934 / 1941
页数：8
相关论文
共 50 条
  • [41] Principle of variable blank holding force stamping and experimental system
    Suxing Gongcheng Xuebao, 1 (30-33):
  • [42] Investigation of dependences of metal sheet variable blank holding force
    Bortkevicius, R.
    Dundulis, R.
    Karpavicius, R.
    MECHANIKA, 2011, (03): : 232 - 238
  • [43] Research on influence of material properties and blank geometry on forming force in fine blanking process
    Daeizadeh, V.
    Elyasi, M.
    MATERIALS RESEARCH INNOVATIONS, 2011, 15 : S370 - S372
  • [44] Strain Evolution during Stretch Forming with a Hemispherical Punch in 5052 Aluminum Alloy Sheets
    Sato, Sho
    Tsukamoto, Maya
    Miyazawa, Naoki
    Maeda, Yasuhiro
    Maeda, Yasushi
    Hama, Takayuki
    MATERIALS TRANSACTIONS, 2024, 65 (10) : 1277 - 1286
  • [45] Influence of Variable Blank Holding Force and Non monotonous Process of Deep Drawing on Formability of Coated Sheets
    Aleksandrovic, Srbislav
    Marusic, Vlatko
    Vujinovic, Tomislav
    Maglic, Leon
    STROJARSTVO, 2010, 52 (02): : 159 - 168
  • [46] Effect of the blank holder force on drawing of aluminum alloy square cup: Theoretical and experimental investigation
    Demiri, Halil. Ibrahim
    Esner, Cemal
    Yasar, Mustafa
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 206 (1-3) : 152 - 160
  • [47] Development of flange by aluminum alloy casting with brazability
    Sukimoto, Minobu
    Koga, Naoyuki
    Fukusako, Tatsuichi
    Keikinzoku/Journal of Japan Institute of Light Metals, 1994, 44 (08): : 433 - 438
  • [48] Numerical Investigation of Flexible Holding Technology for Stretch Forming Process
    Peng, Heli
    Li, Mingzhe
    Han, Qigang
    Feng, Pengxiao
    Chen, Xue
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 2126 - 2130
  • [49] Accurate optimization of blank design in stretch flange based on a forward-inverse prediction scheme
    Yeh, Fung-Huei
    Wu, Ming-Tsung
    Li, Ching-Lun
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (12-13): : 1854 - 1863
  • [50] Influence of blank shape and the setting of drawbead on wrinkling and inadequate stretch areas in automobile covering parts forming processes
    School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China
    不详
    Suxing Gongcheng Xuebao, 2006, 6 (39-43):
12345