Graphite Containing Composites Based on Bearing Steel under Boundary Sliding with High Electric Current Density

被引:0
|
作者
Aleutdinova, M. I. [1 ,2 ]
Fadin, V. V. [1 ]
Aleutdinov, K. A. [3 ]
机构
[1] RAS, SB, Inst Strength Phys & Mat Sci, Tomsk 634055, Russia
[2] Natl Res Nucl Univ MEPhI, Seversk Technol Inst, Seversk 636036, Russia
[3] Natl Res Tomsk Polytech Univ, Tomsk 634050, Russia
关键词
D O I
10.1063/1.5083249
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
It was shown that rather low wear intensity of sintered graphite-containing composites was achieved in the self-lubrication mode under the influence of electric current in sliding against the copper counterbody. Composites were based on hearing steel, obtained from grinding wastes. The composites were sintered in air medium being protected by graphite powder. It was noted that a change in the concentration of graphite or copper in the primary structure of the composites had little effect on the characteristics of the contact. It was found that the main influence on the contact behavior was due to the oil amount on the sliding surface. It was concluded that long-term contact can be realized if the composite has an open pore space.
引用
收藏
页数:4
相关论文
共 50 条