Performance of ejector cooling system with thermal pumping effect using R141b and R365mfc

被引:30
|
作者
Wang, Jin Hua [1 ]
Wu, J. H. [1 ]
Hu, S. S. [1 ]
Huang, B. J. [1 ]
机构
[1] Natl Taiwan Univ, Dept Mech Engn, Taipei 10764, Taiwan
关键词
Ejector cooling system; Ejector; R365mfc; R141b; LOW-GRADE HEAT; THERMODYNAMIC ANALYSIS; DRIVEN PUMP; SOLAR;
D O I
10.1016/j.applthermaleng.2008.08.015
中图分类号
O414.1 [热力学];
学科分类号
摘要
The ejector cooling system (ECS) is suitable for solar cooling application due to its simple design and low cost. An ECS using a multi-function generator (ECS/MFG) as a thermal pumping device without rotating machines for refrigerant circulation has been designed and tested. The experiment of an ECS/MFG operating at full-cycle while using R141b has shown that the COPo can reach 0.225 and cooling capacity of 0.75 kW at generator temperature 90 degrees C. condenser temperature 37 degrees C, and evaporator temperature 8.5 degrees C. The present study also redesigned the ejector for working fluid R365mfc in order to replace R141b. This study has shown that R365mfc can replace R141b as the working fluid of ECS/MFG at no payoff of system performance as long as the ejector design is optimized. (C) 2008 Elsevier Ltd. All rights reserved.
引用
下载
收藏
页码:1904 / 1912
页数:9
相关论文
共 50 条
  • [21] Effect of electric field on flow boiling pressure drop characteristics of R141b in microchannel
    Luo, Xiaoping
    Peng, Zizhe
    Liu, Qian
    Guo, Feng
    Zhang, Jinxin
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2020, 36 (01): : 257 - 265
  • [22] Optimizing the set generating temperature to improve the designed performance of an ejector cooling system with thermal pumping effect (ECSTPE)
    Zhang, Sheng
    Lin, Zhang
    Cheng, Yong
    SOLAR ENERGY, 2017, 157 : 309 - 320
  • [23] Study on the effects of acetone and R141b on the performance of micro heat pipe PV/T systems
    Li, Jinping
    Wang, Hongyang
    Liu, Xiaomin
    Zhu, Junjie
    Novakovic, Vojislav
    Karkon, Ehsan Gholamian
    ENERGY, 2024, 297
  • [24] Study of enhanced heat transfer performance of subcooled and saturated flow boiling with R365mfc on sintered porous coating high heat flux tubes
    Wang, Ke
    Zhang, Qi
    Cheng, Lixin
    Yang, Junjun
    Yang, Xu
    APPLIED THERMAL ENGINEERING, 2024, 255
  • [25] Experimental evaluation of the performance of a thermodynamic vent system for a vapor-liquid storage tank with R141b as the testing fluid
    Huang, Yonghua
    Wang, Bin
    Chen, Zhongcan
    Sun, Peijie
    Li, Peng
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2018, 90 : 83 - 90
  • [26] Comprehensive evaluation of graphene/R141b nanofluids enhanced heat transfer performance of minichannel heat sinks
    Zhou, Jianyang
    Luo, Xiaoping
    He, Bolin
    Li, Changzheng
    Liang, Lizhe
    Yin, Zhixin
    Tian, Zhi Qun
    POWDER TECHNOLOGY, 2022, 397
  • [27] Experimental study on a prototype solar water heater using refrigerant R141b as a transfer fluid
    Ambarita, Himsar
    Sitepu, Tekad
    1ST NOMMENSEN INTERNATIONAL CONFERENCE ON TECHNOLOGY AND ENGINEERING, 2017, 237
  • [28] Experimental investigation and intelligent modeling of thermal conductivity of R141b based nanorefrigerants containing metallic oxide nanoparticles
    Zhang, Songyuan
    Li, Yuexiwei
    Xu, Zheng
    Liu, Cong
    Liu, Zhennan
    Ge, Zhong
    Ma, Lei
    POWDER TECHNOLOGY, 2022, 395 : 850 - 871
  • [29] Influence of particle concentration and temperature on thermal conductivity and viscosity of Al2O3/R141b nanorefrigerant
    Mahbubul, I. M.
    Saidur, R.
    Amalina, M. A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 43 : 100 - 104
  • [30] A solar ejector cooling system using refrigerant R134a in the Athens area
    Alexis, GK
    Karayiannis, EK
    RENEWABLE ENERGY, 2005, 30 (09) : 1457 - 1469