Experimental Validation of Modal Parameters in Rotating Machinery

被引：1
|
作者：
Vervisch, Bram [1 ,2 ]
Stockman, Kurt [1 ]
Loccufier, Mia [2 ]
机构：
[1] Univ Ghent, Dept Ind Syst & Prod Design, B-8500 Kortrijk, Belgium
[2] Univ Ghent, Dept Elect Engn Syst & Automat, B-9000 Ghent, Belgium
来源：
SPECIAL TOPICS IN STRUCTURAL DYNAMICS, VOL 6, 2015 | 2015年
关键词：
Rotating machinery; Rotating damping; Experimental modal analysis; Damping matrix estimation; Decay rate; LINEAR VIBRATION; IDENTIFICATION;
D O I：
10.1007/978-3-319-15048-2_16
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
In this paper, instability of rotating machinery systems due to rotating damping is investigated through experimental modal analysis. Generally, advanced methods are needed for these kind of systems because of the asymmetry of the matrices. However, it is shown by means of cyclic energy dissipation that the rotating damping can be handled as damping which changes due to the rotating speed. The use of damping matrix estimation techniques is discussed and a method is proposed to estimate and model the influence of the rotating damping matrix. A dedicated experimental setup, with negligible gyroscopic effect, is presented for validation purposes. It is shown experimentally that the estimation of the rotating damping matrix is able to predict the decay rate of the first forward mode.
引用
收藏
页码：171 / 178
页数：8
相关论文
共 50 条
  • [21] Rotating machinery health evaluation by modal force identification
    Morais, Tobias Souza
    Leao, Leandro de Souza
    Ap Cavalini Jr, Aldemir
    Steffen Jr, Valder
    INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 2020, 28 (05) : 695 - 715
  • [22] Operational Modal Analysis of Torsional Modes in Rotating Machinery
    Carden, Eoin Peter
    Lindblad, Mattias
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (02):
  • [23] An experimental study of rotational effects on modal parameters of rotating wind turbine blades
    Zhou, Wensong
    Nasser, Houssein
    Li, Hui
    Zeng, Haiyong
    PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS, EURODYN 2011, 2011, : 3457 - 3461
  • [24] Operational Modal Identification for Rotating Machinery under Environment Excitation
    Li Q.
    Chu F.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (19): : 28 - 34
  • [25] MODAL PARAMETER IDENTIFICATION AND SENSITIVITY ANALYSIS IN ROTATING MACHINERY.
    Nordmann, R.
    Energia Elettrica, 1982, 59 (10): : 95 - 102
  • [26] OPERATIONAL MODAL ANALYSIS OF LATERAL ROTORDYNAMIC MODES OF ROTATING MACHINERY
    Carden, Eoin Peter
    Morosi, Stefano
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2014, VOL 7A, 2014,
  • [27] Computer Modal Analysis of Rotating Machinery under Complex Conditions
    Yi, Jiangang
    Han, Qianpeng
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIAL, MECHANICAL AND MANUFACTURING ENGINEERING, 2015, 27 : 403 - 406
  • [28] Verification and Validation of Rotating Machinery Using Digital Twin
    Yanik, Yasar
    Ekwaro-Osire, Stephen
    Dias, Joao Paulo
    Porto, Edgard Haenisch
    Alves, Diogo Stuani
    Machado, Tiago Henrique
    Daniel, Gregory Bregion
    de Castro, Helio Fiori
    Cavalca, Katia Lucchesi
    ASCE-ASME JOURNAL OF RISK AND UNCERTAINTY IN ENGINEERING SYSTEMS PART B-MECHANICAL ENGINEERING, 2024, 10 (01):
  • [29] FAULT DETECTION IN ROTATING MACHINERY BY USING THE MODAL STATE OBSERVER APPROACH
    Leao, Leandro de S.
    Cavalini, Aldemir Ap., Jr.
    Morais, Tobias S.
    de Melo, Gilberto Pechoto
    Steffen, Valder, Jr.
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2017, VOL 8, 2017,
  • [30] Automated Operational Modal Analysis for Rotating Machinery Based on Clustering Techniques
    Dreher, Nathali Rolon
    Storti, Gustavo Chaves
    Machado, Tiago Henrique
    SENSORS, 2023, 23 (03)
12345