Experimental Validation of Modal Parameters in Rotating Machinery

被引：1
|
作者：
Vervisch, Bram [1 ,2 ]
Stockman, Kurt [1 ]
Loccufier, Mia [2 ]
机构：
[1] Univ Ghent, Dept Ind Syst & Prod Design, B-8500 Kortrijk, Belgium
[2] Univ Ghent, Dept Elect Engn Syst & Automat, B-9000 Ghent, Belgium
来源：
SPECIAL TOPICS IN STRUCTURAL DYNAMICS, VOL 6, 2015 | 2015年
关键词：
Rotating machinery; Rotating damping; Experimental modal analysis; Damping matrix estimation; Decay rate; LINEAR VIBRATION; IDENTIFICATION;
D O I：
10.1007/978-3-319-15048-2_16
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
In this paper, instability of rotating machinery systems due to rotating damping is investigated through experimental modal analysis. Generally, advanced methods are needed for these kind of systems because of the asymmetry of the matrices. However, it is shown by means of cyclic energy dissipation that the rotating damping can be handled as damping which changes due to the rotating speed. The use of damping matrix estimation techniques is discussed and a method is proposed to estimate and model the influence of the rotating damping matrix. A dedicated experimental setup, with negligible gyroscopic effect, is presented for validation purposes. It is shown experimentally that the estimation of the rotating damping matrix is able to predict the decay rate of the first forward mode.
引用
收藏
页码：171 / 178
页数：8
相关论文
共 50 条
  • [1] On the identification of foundations in rotating machinery using modal parameters
    Feng, N.
    Hahn, E. J.
    Medina, L. U.
    PROCEEDINGS OF ISMA2010 - INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING INCLUDING USD2010, 2010, : 1589 - 1603
  • [2] On the identification of damped foundations in rotating machinery using modal parameters
    Yu, M.
    Feng, N.
    Hahn, E.
    PROCEEDINGS OF ISMA2016 INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING AND USD2016 INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS, 2016, : 989 - 998
  • [3] Complex modal analysis and modal superposition for rotating machinery
    Kessler, C
    Kim, J
    IMAC - PROCEEDINGS OF THE 17TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS I AND II, 1999, 3727 : 1930 - 1937
  • [4] On the use of modal parameters as metrics for condition-based monitoring of rotating machinery
    Ginsberg, Jerry H.
    Wagner, Benjamin B.
    Proceedings of the ASME Turbo Expo 2005, Vol 4, 2005, : 871 - 882
  • [5] Operational Modal Analysis of Rotating Machinery
    Gres, S.
    Andersen, P.
    Damkilde, L.
    ROTATING MACHINERY, VIBRO-ACOUSTICS & LASER VIBROMETRY, VOL 7, 2019, : 67 - 75
  • [6] Modal parameter estimation of rotating machinery
    Pottie, K
    Matthijssen, JGA
    Norbart, CJJ
    Gielen, LJP
    SEVENTH EUROPEAN CONGRESS ON FLUID MACHINERY FOR THE OIL, PETROCHEMICAL, AND RELATED INDUSTRIES, 1999, 1999 (02): : 157 - 176
  • [7] Rotor-Model-Based Identification of Foundations in Rotating Machinery Using Modal Parameters
    Feng, N.
    Hahn, E.
    VIBRATION PROBLEMS ICOVP 2011, 2011, 139 : 529 - 535
  • [8] An equation decoupling approach to identify the equivalent foundation in rotating machinery using modal parameters
    Yu, Minli
    Feng, Ningsheng
    Hahn, Eric J.
    JOURNAL OF SOUND AND VIBRATION, 2016, 365 : 182 - 198
  • [9] Temperature Effects on Modal Parameters and Its Experimental Validation
    Sun, L. M.
    Min, Z. H.
    HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS 2010, PTS 1 AND 2, 2010, 7650
  • [10] Modal testing of rotating machinery while it is operating
    Marscher, WD
    IMAC - PROCEEDINGS OF THE 17TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS I AND II, 1999, 3727 : 263 - 269
12345