Development of a Continuous CVD Process for TRISO Coating of AGR Fuel

被引：0
|
作者：
Keeley, Joseph T. [1 ]
Tomlin, Bruce L. [1 ]
Richardson, W. Clay [1 ]
Barnes, Charles [2 ]
Marshall, Douglas [2 ]
机构：
[1] Babcock & Wilcox Nucl Operat Grp, POB 785, Lynchburg, VA 24505 USA
[2] Battelle Energy Alliance, Idaho Falls, ID 83415 USA
来源：
PROCEEDINGS OF THE 4TH INTERNATIONAL TOPICAL MEETING ON HIGH TEMPERATURE REACTOR TECHNOLOGY, VOL 1 | 2009年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
As part of the Department of Energy's Advanced Gas Reactor Fuel program, Babcock & Wilcox is developing a fluidized bed chemical vapor deposition process to deposit a TRISO coating on UCO and UO2 kernels. These coated kernels will go into irradiation tests in the Advanced Test Reactor at Idaho National Laboratory. This paper reports on the development activities including the furnace design and the furnace runs made to qualify the coating process.
引用
收藏
页码：1 / +
页数：2
相关论文
共 50 条
  • [21] Sensitivity of stresses in TRISO-coated fuel particles to the coating layer properties
    Li, Rong
    Liu, Bing
    Tang, Chunhe
    [J]. NUCLEAR ENGINEERING AND DESIGN, 2016, 307 : 309 - 318
  • [22] Continuous atmospheric pressure CVD coating of fibers
    Gabor, Thomas
    O'Selly, James M.
    [J]. Ceramic Engineering and Science Proceedings, 1995, 16 (01): : 226 - 240
  • [23] High temperature steam oxidation of SiC coating layer of TRISO fuel particles
    Terrani, Kurt A.
    Silva, Chinthaka M.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2015, 460 : 160 - 165
  • [24] EBSD for microstructure and property characterization of the SiC-coating in TRISO fuel particles
    Tan, L.
    Allen, T. R.
    Hunn, J. D.
    Miller, J. H.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2008, 372 (2-3) : 400 - 404
  • [25] Stress Profile in Coating Layers of TRISO Fuel Particles in Contact with One Another
    Schappel, Daniel
    Terrani, Kurt A.
    [J]. NUCLEAR SCIENCE AND ENGINEERING, 2022, 196 (11) : 1349 - 1360
  • [26] SiC layer microstructure in AGR-1 and AGR-2 TRISO fuel particles and the influence of its variation on the effective diffusion of key fission products
    Gerczak, Tyler J.
    Hunn, John D.
    Lowden, Richard A.
    Allen, Todd R.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2016, 480 : 257 - 270
  • [27] Modeling a Discontinuous CVD Coating Process: I. Model Development and Validation
    Lawrence, Joseph G.
    Nadarajah, Arunan
    [J]. FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2007, 3 (03): : 247 - 254
  • [28] PRELIMINARY DEVELOPMENT OF A TRISO FUEL PERFORMANCE ANALYSIS CODE, FFAT
    Li, Jian
    She, Ding
    Shi, Lei
    Zhao, Jing
    [J]. PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2018, VOL 3, 2018,
  • [29] MODELING OF THE SB-CVD PROCESS USED FOR TRISO COATED PARTICLE FUELS FABRICATION
    Mendes, Alexandra
    Cellier, Francois
    Ablitzer, Carine
    Perrais, Christophe
    Dolllet, Alain
    Flamant, Gilles
    [J]. PROCEEDINGS OF THE 4TH INTERNATIONAL TOPICAL MEETING ON HIGH TEMPERATURE REACTOR TECHNOLOGY, VOL 1, 2009, : 289 - 295
  • [30] An analysis of nuclear fuel burnup in the AGR-1 TRISO fuel experiment using gamma spectrometry, mass spectrometry, and computational simulation techniques
    Harp, Jason M.
    Demkowicz, Paul A.
    Winston, Philip L.
    Sterbentz, James W.
    [J]. NUCLEAR ENGINEERING AND DESIGN, 2014, 278 : 395 - 405
12345