Microstructure and corrosion properties of Mg-Zn-Ca-Nd alloy for biomedical application

被引:2
|
作者
Jiang Dongmei [1 ]
Cao Zhanyi [1 ]
Guo Liang [1 ]
Sun Xu [1 ]
Zhang Jinling [1 ]
机构
[1] Jilin Univ, Key Lab Automobile Mat, Minist Educ, Changchun 130025, Peoples R China
来源
关键词
Mg-Zn-Ca-Nd alloy; Neodymium (Nd); Microstructure; corrosion properties; MECHANICAL-PROPERTIES; SOLID-SOLUTION; BEHAVIORS;
D O I
10.4028/www.scientific.net/AMR.750-752.756
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure and corrosion properties of the as-cast Mg-Zn-Ca-Nd alloys were investigated in this study. The results showed that the alloy was mainly composed of alpha-Mg solid solution and the secondary phases of MgZn, Ca2Mg6Zn3 and Mg41Nd5. The portion of precipitated phases was increased with the increment of Nd content. Both electrochemical measurement and immersion test indicated that Mg-4Zn-0.5Ca-1.0Nd had the best corrosion resistance in SBF solution. This is attributed to a combination of (1) the uniform microstructure of alloy, and (2) a lower volume fraction of second phases. In the Mg-4Zn-0.5Ca-3.0Nd alloy, the corrosion rate might slow down due to finer dendrite cells were surrounded by the more continuous second phases along the grain boundary and in the alpha-Mg matrix.
引用
收藏
页码:756 / 759
页数:4
相关论文
共 50 条
  • [1] Microstructure, mechanical properties and bio-corrosion properties of Mg-Si(-Ca, Zn) alloy for biomedical application
    Zhang, Erlin
    Yang, Lei
    Xu, Jianwei
    Chen, Haiyan
    ACTA BIOMATERIALIA, 2010, 6 (05) : 1756 - 1762
  • [2] Microstructure, mechanical properties and bio-corrosion properties of Mg-Zn-Mn-Ca alloy for biomedical application
    Zhang, Erlin
    Yang, Lei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 497 (1-2): : 111 - 118
  • [3] Microstructure and Properties of Mg-3Zn-0.2Ca Alloy for Biomedical Application
    Yang Min
    Liu Debao
    Zhang Runfang
    Chen Minfang
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (01) : 93 - 98
  • [4] Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy for biomedical application
    Jiang Dongmei
    Guo Liang
    Cao Zhanyi
    Sun Xu
    Huang Fengxiao
    ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3, 2013, 774-776 : 791 - +
  • [5] Effects of ECAP on Microstructure and Corrosion Behavior of Biomedical Mg-Zn-Ca Alloy
    等通道转角挤压对生物Mg-Zn-Ca合金显微组织与腐蚀行为的影响
    Liu, Debao (debaoliu@126.com), 2018, Science Press (47):
  • [6] Effects of ECAP on Microstructure and Corrosion Behavior of Biomedical Mg-Zn-Ca Alloy
    Zhang Runfang
    Liu Debao
    Li Hua
    Chen Minfang
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (09) : 2833 - 2839
  • [7] Phosphating treatment and corrosion properties of Mg–Mn–Zn alloy for biomedical application
    Liping Xu
    Erlin Zhang
    Ke Yang
    Journal of Materials Science: Materials in Medicine, 2009, 20
  • [8] Microstructure and properties of biomedical Mg-Zn-Ca alloy at different extrusion temperatures
    Song, Yuwei
    Yuan, Kezhen
    Li, Xian
    Qiao, Yang
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [9] Microstructure, mechanical properties and biomedical application of medical implantable extruded Mg-Zn-Zr-Ca alloy
    Huang, Ying-Ting
    Lee, Chen-Jie
    Hung, Fei-Yi
    Yen, Chen-Wei
    MATERIALS RESEARCH EXPRESS, 2023, 10 (12)
  • [10] Corrosion studies and microstructure of Mg - Zn - Ca alloys for biomedical applications
    Abdel-Gawad, Soha A.
    Shoeib, Madiha A.
    SURFACES AND INTERFACES, 2019, 14 : 108 - 116