Design of mould fluxes for continuous casting of special steels

被引：5

作者：

Yan, W. ^{[1
,2
]}

Yang, Y. D. ^{[2
]}

Chen, W. Q. ^{[1
]}

Barati, M. ^{[2
]}

McLean, A. ^{[2
]}

机构：

[1] Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China

[2] Univ Toronto, Dept Mat Sci & Engn, Toronto, ON M5S 3E4, Canada

来源：

CANADIAN METALLURGICAL QUARTERLY | 2015年 / 54卷 / 04期

关键词：

Continuous casting of steel; Carbon structure; Design of mould flux; Heat-resistant steel; Non-magnetic steel; X-RAY-DIFFRACTION; CARBON STRUCTURE; BLAST-FURNACE; MELTING BEHAVIOR; SLAG; POWDER; COALS; COKE;

D O I：

10.1179/1879139515Y.0000000034

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The melting behaviour of mould powder during continuous casting is an important consideration with respect to caster performance, production rate and steel quality. Two important factors, powder composition and carbon addition, are critical to control the properties and melting behaviour of the mould flux. In this study, the effect of different carbonaceous materials on the melting characteristics of mould powders was evaluated. Correlations were established between the structural factors and chemical reactivity of carbon and melting behaviour of mould flux. In addition, two examples are given of the effect of flux composition on casting performance for specific steels. A flux with reasonable basicity and additives was designed for the casting of heat-resistant steel (Incoloy 800) to reduce surface cracks. Another flux was designed for the casting of non-magnetic steel containing high aluminium by partially replacing SiO2 with Al2O3 to limit aluminium oxidation by SiO2.

引用

页码：467 / 476

页数：10

共 50 条

[41] High speed continuous casting of steel billets - Part 2: Mould heat transfer and mould design
Chow, C
Samarasekera, IV
Walker, BN
Lockhart, G
IRONMAKING & STEELMAKING, 2002, 29 (01) : 61 - 69
[42] DEVELOPMENTS AND EXPERIENCE IN (THE FIELD OF) HORIZONTAL CONTINUOUS-CASTING OF SPECIAL STEELS
STADLER, P
STAHL UND EISEN, 1986, 106 (22): : 1187 - 1195
[43] Continuous Casting of Hypo-peritectic Steels: Mould Thermal Monitoring and DSC-analysis
Stranggießen von hypo-peritektischen Stählen: thermisches Kokillen-Monitoring und DSC-Analysen
Presoly, Peter (peter.presoly@unileoben.ac.at), 1600, Springer (159):
[44] Analysis of Thermomechanical Behavior in Continuous Casting Mould and Design of Breakout Prediction System
Wang, Yi
Ma, Xinjian
ADVANCED MATERIALS RESEARCH II, PTS 1 AND 2, 2012, 463-464 : 205 - 209
[45] Special technique of plaster mould in investment casting
Zhang, Yonghong
Jiang, Yuming
Yang, Yi
Zhuzao Jishu/Foundry Technology, 2002, 23 (06):
[46] REFRACTORIES FOR CONTINUOUS CASTING OF STEELS
ALIPRAND.G
METALLURGIA ITALIANA, 1971, 63 (04): : 139 - &
[47] Continuous casting of steels in Japan
Miyazawa, Ken-ichi
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2001, 2 (01) : 59 - 65
[48] Mould powder for thin slab continuous casting
Zhang, Helin
Zhu, Guoling
Kang T'ieh/Iron and Steel (Peking), 1995, 30 (02): : 23 - 27
[49] Mould powder selection model for continuous casting
Fox, AB
Mills, KC
Sridhar, S
Lee, PD
85TH STEELMAKING CONFERENCE PROCEEDINGS, 2002, 85 : 133 - 144
[50] Mould Powder Development for Continuous Casting of Steel
Kromhout, J. A.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2013, 66 (5-6) : 587 - 596

← 1 2 3 4 5 →