Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel

被引：24
|
作者：
Akhter, J. I. [1 ]
Ahmad, M. [1 ]
Ali, G. [1 ]
机构：
[1] Pakistan Inst Nucl Sci & Technol, Div Phys, Islamabad, Pakistan
来源：
MATERIALS CHARACTERIZATION | 2009年 / 60卷 / 03期
关键词：
Microstructure; Diffusion; Electron microscopy; Hardness; PRESSURIZED WATER-REACTORS; INTERMEDIATE LAYER; WELDED-JOINTS;
D O I：
10.1016/j.matchar.2008.08.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Diffusion bonding of Zircaloy-4 and Type 316-L stainless steel was carried out by coating the joining surfaces with Ti to minimize the interlayer effect. Bonding heat treatments were carried out in vacuum at 1000 degrees C for 4 h and 1050 degrees C for 1 h. The microstructure of the diffusion zone was investigated by scanning electron microscopy and the phases in the diffusion zone were analyzed by energy dispersive spectroscopy. It is observed that Ti coating at the interface produced a dendritic structure in the diffusion zone formed in the Zircaloy-4. The concentration of the dendrites increases with an increase in bonding temperature. (C) 2008 Elsevier Inc. All rights reserved.
引用
收藏
页码：193 / 196
页数：4
相关论文
共 50 条
  • [31] INFLUENCE OF ELECTROPOLISHING ON CORROSION OF COLD-WORKED 316-L STAINLESS-STEEL
    SUTOW, EJ
    MINER, JA
    [J]. JOURNAL OF DENTAL RESEARCH, 1976, 55 : B97 - B97
  • [32] Surface topographical effects in the diffusion bonding of 316 stainless steel
    Saranam, Venkata Rajesh
    Mullany, Brigid
    Tabei, Ali
    Srenevas, Subhasree
    Evans, Chris
    Paul, Brian K.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 296
  • [33] Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304L
    Ahmad, M.
    Akhter, J. I.
    Akhtar, M.
    Iqbal, M.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (01) : 328 - 331
  • [34] Dissimilar Joining of Zircaloy-4 to Type 304L Stainless Steel by Friction Welding Process
    A. Ravi Shankar
    S. Suresh Babu
    Mohammed Ashfaq
    U. Kamachi Mudali
    K. Prasad Rao
    N. Saibaba
    Baldev Raj
    [J]. Journal of Materials Engineering and Performance, 2009, 18 : 1272 - 1279
  • [35] Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304L
    M. Ahmad
    J. I. Akhter
    M. Akhtar
    M. Iqbal
    [J]. Journal of Materials Science, 2007, 42 : 328 - 331
  • [36] Effect of Isothermal Hold on the Microstructural Evolution of the Stainless Steel 304L/Zircaloy-4 Interface
    Lebaili, A.
    Taouinet, M.
    Nibou, D.
    Lebaili, S.
    Hodaj, F.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (07) : 3112 - 3120
  • [37] Dissimilar Joining of Zircaloy-4 to Type 304L Stainless Steel by Friction Welding Process
    Shankar, A. Ravi
    Babu, S. Suresh
    Ashfaq, Mohammed
    Mudali, U. Kamachi
    Rao, K. Prasad
    Saibaba, N.
    Raj, Baldev
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (09) : 1272 - 1279
  • [38] Microstructural aspects of the zircaloy-4/ss-304l interface obtained by diffusion bonding technique
    Lebaili, Abdelatif
    Taouinet, Mustapha
    Lebaili, Soltane
    [J]. Solid State Phenomena, 2019, 297 : 17 - 30
  • [39] Microstructures and hot cracking formed at the interface of Zircaloy-4/stainless-steel-304L junctions
    Lebaili, Abdelatif
    [J]. CANADIAN METALLURGICAL QUARTERLY, 2023, 62 (04) : 690 - 700
  • [40] INVITRO INVESTIGATION OF ANODIC POLARIZATION AND CAPACITANCE BEHAVIOR OF 316-L STAINLESS-STEEL
    SUTOW, EJ
    POLLACK, SR
    KOROSTOFF, E
    [J]. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1976, 10 (05): : 671 - 693
12345