Diffusion bonding of Ti coated Zircaloy-4 and 316-L stainless steel

被引：24
|
作者：
Akhter, J. I. [1 ]
Ahmad, M. [1 ]
Ali, G. [1 ]
机构：
[1] Pakistan Inst Nucl Sci & Technol, Div Phys, Islamabad, Pakistan
来源：
MATERIALS CHARACTERIZATION | 2009年 / 60卷 / 03期
关键词：
Microstructure; Diffusion; Electron microscopy; Hardness; PRESSURIZED WATER-REACTORS; INTERMEDIATE LAYER; WELDED-JOINTS;
D O I：
10.1016/j.matchar.2008.08.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Diffusion bonding of Zircaloy-4 and Type 316-L stainless steel was carried out by coating the joining surfaces with Ti to minimize the interlayer effect. Bonding heat treatments were carried out in vacuum at 1000 degrees C for 4 h and 1050 degrees C for 1 h. The microstructure of the diffusion zone was investigated by scanning electron microscopy and the phases in the diffusion zone were analyzed by energy dispersive spectroscopy. It is observed that Ti coating at the interface produced a dendritic structure in the diffusion zone formed in the Zircaloy-4. The concentration of the dendrites increases with an increase in bonding temperature. (C) 2008 Elsevier Inc. All rights reserved.
引用
收藏
页码：193 / 196
页数：4
相关论文
共 50 条
  • [1] Characterization of the interface to diffusion bonding of zircaloy-4 and stainless steel
    Taouinet, M.
    Lebaili, S.
    Souami, N.
    [J]. PROCEEDINGS OF THE JMSM 2008 CONFERENCE, 2009, 2 (03): : 1231 - 1239
  • [2] An investigation on diffusion bonding of Zircaloy-4 and 304L stainless steel with Ti and Ag multiple interlayers
    Pan, Houhong
    Liu, Baoshuan
    Guo, Yangyang
    Liu, Yan
    Quan, Gaofeng
    [J]. MATERIALS LETTERS, 2019, 240 : 185 - 188
  • [3] Joining of stainless steel 304L with Zircaloy-4 by diffusion bonding technique using Ni and Ti interlayers
    Srikanth, V.
    Laik, A.
    Dey, G. K.
    [J]. MATERIALS & DESIGN, 2017, 126 : 141 - 154
  • [4] Formation of dendritic structure in the diffusion zone of the bonded Zircaloy-4 and stainless steel 316L in the presence of Ti interlayer
    Akhter, JI
    Ahmad, M
    Iqbal, M
    Akhtar, M
    Shaikh, MA
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 399 (1-2) : 96 - 100
  • [5] Diffusion Bonding Between Zircaloy-4 and 304L Stainless Steel in the Presence of a Eutectic
    Taouinet, M.
    Kamel, N. E.
    Lebaili, S.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (12) : 1327 - 1334
  • [6] Diffusion bonding of stainless steel to zircaloy-4 in the presence of a Ta intermediate layer
    Ahmad, M
    Akhter, JI
    Zaman, Q
    Shaikh, MA
    Akhtar, M
    Iqbal, M
    Ahmed, E
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2003, 317 (2-3) : 212 - 216
  • [7] INVESTIGATION OF DIFFUSION-BONDING BETWEEN ZIRCALOY-4 AND 304 STAINLESS-STEEL
    SHAABAN, HI
    HAMMAD, FH
    BARON, JL
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1978, 71 (02) : 277 - 285
  • [8] Linear Friction Welding of Dissimilar Materials 316L Stainless Steel to Zircaloy-4
    P. Wanjara
    B. S. Naik
    Q. Yang
    X. Cao
    J. Gholipour
    D. L. Chen
    [J]. Metallurgical and Materials Transactions A, 2018, 49 : 1641 - 1652
  • [9] Linear Friction Welding of Dissimilar Materials 316L Stainless Steel to Zircaloy-4
    Wanjara, P.
    Naik, B. S.
    Yang, Q.
    Cao, X.
    Gholipour, J.
    Chen, D. L.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1641 - 1652
  • [10] DIFFUSION-BONDING OF STAINLESS-STEEL TO ZIRCALOY-4 IN PRESENCE OF AN IRON INTERMEDIATE LAYER
    SHAABAN, HI
    HAMMAD, FH
    BARON, JL
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1978, 78 (02) : 431 - 433
12345