Tensile properties of sinter hardened powder metallurgy components machined in their green state

被引：13
|
作者：
Robert-Perron, E. [1 ]
Blais, C. [1 ]
Pelletier, S. [2 ]
机构：
[1] Univ Laval, Dept Min Met & Mat Engn, Quebec City, PQ, Canada
[2] Natl Res Council Canada, Inst Ind Mat, Powder Forming Res Grp, Boucherville, PQ J4B 6Y4, Canada
来源：
POWDER METALLURGY | 2009年 / 52卷 / 01期
关键词：
Powder metallurgy; Green machining; Sinter hardening; Tensile properties;
D O I：
10.1179/174329007X205055
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
With the increasing demand for sinter hardened powder metallurgy components, there is a growing need to solve the poor machining behaviour that characterises them. Approaches based on green machining appear promising to extend tool life and reduce machining costs. The present study deals with the sintered properties of cylindrical tensile specimens green machined. Results show that tensile properties of components machined in their green state are identical to those of components machined after sintering.
引用
收藏
页码：80 / 83
页数：4
相关论文
共 50 条
  • [41] Measurement of Young's modulus and tensile failure properties of green powder compacts
    Korachkin, D.
    Gethin, D. T.
    Lewis, R. W.
    Tweed, J. H.
    Guyoncourt, D. M. M.
    [J]. POWDER METALLURGY, 2008, 51 (02) : 150 - 159
  • [42] POST－DEFORMATION TENSILE PROPERTIES IN A RAPIDLY SOLIDIFIED POWDER METALLURGY MR64 ALLOY
    Cui
    Liang
    Chen
    Zhang
    [J]. Transactions of Nonferrous Metals Society of China, 1994, (01) : 80 - 84+90
  • [43] Microstructure, Properties and Tensile Fracture Behavior of Powder Metallurgy Decorative Pattern Steel in Different Heat Treatments
    Li, Wei
    Cao, Rui
    Yan, Yingjie
    [J]. Cailiao Daobao/Materials Reports, 2022, 36 (09):
  • [44] Effects of microstructural anisotropy and helium implantation on tensile properties of powder-metallurgy processed tungsten plates
    Miyazawa, Takeshi
    Matsui, Kento
    Hasegawa, Akira
    [J]. NUCLEAR MATERIALS AND ENERGY, 2022, 30
  • [45] The microstructure and tensile properties of the Ti2AlC reinforced TiAl composites fabricated by powder metallurgy
    Sun, Hongfei
    Li, Xuewen
    Zhang, Peng
    Fang, Wenbin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 611 : 257 - 262
  • [46] Effects of Cooling Rate on the Microstructure and Tensile Properties of Powder Metallurgy Ti2AlNb Alloy
    Tian, Xiaosheng
    Wu, Jie
    Lu, Zhengguan
    Guo, Ruipeng
    Xu, Lei
    Yang, Rui
    [J]. JOM, 2022, 74 (08) : 2964 - 2972
  • [47] Effects of Cooling Rate on the Microstructure and Tensile Properties of Powder Metallurgy Ti2AlNb Alloy
    Xiaosheng Tian
    Jie Wu
    Zhengguan Lu
    Ruipeng Guo
    Lei Xu
    Rui Yang
    [J]. JOM, 2022, 74 : 2964 - 2972
  • [48] Microstructure and tensile properties of aluminum powder metallurgy alloy prepared by a novel low-pressure sintering
    Wu, Lei
    Yu, Zhaoji
    Liu, Chao
    Ma, Yunzhu
    Huang, Yufeng
    Wang, Tao
    Yang, Lun
    Yan, Huanyuan
    Liu, Wensheng
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 14 : 1419 - 1429
  • [49] Influence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum
    Martin, F.
    Garcia, C.
    Blanco, Y.
    Rodriguez-Mendez, M. L.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 : 360 - 365
  • [50] Fabrication, microstructures, and tensile properties of magnesium alloy AZ91/SiCp composites produced by powder metallurgy
    Lee, DM
    Suh, BK
    Kim, BG
    Lee, JS
    Lee, CH
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (07) : 590 - 595
12345