Microstructural and mechanical properties of friction stir welded pure lead

被引：0

作者：

Gunen, A. ^{[1
]}

Kanca, E. ^{[1
]}

Demir, M. ^{[1
]}

Cavdar, F. ^{[2
]}

Mistikoglu, S. ^{[1
]}

Cam, G. ^{[1
]}

机构：

[1] Iskenderun Tech Univ, Mat Engn Dept, Fac Engn & Nat Sci, Antakya, Turkey

[2] Iskenderun Tech Univ, Dortyol Vocat High Sch, Antakya, Turkey

来源：

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES | 2018年 / 25卷 / 01期

关键词：

Lead; Toxic effect; Friction stir welding; Joint performance; AL-ALLOY PLATES; TEMPER CONDITION; ALUMINUM-ALLOYS; HEAT-TREATMENT; TENSILE PROPERTIES; MAGNESIUM ALLOY; DH36; STEEL; JOINTS; PARAMETERS; AA7075;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending tests. The effects of the tool rotational speed (1500, 2000 and 2500 rev/min) and welding speed (72, 100 and 125 mm/min) on the joint performance are determined. The results indicate that the welded joints exhibit similar or higher mechanical properties than those of the base material. Optimal joint performance was achieved with a rotational speed of 1500 rev/min and welding speed of 100 mm/min.

引用

页码：26 / 32

页数：7

共 50 条

[41] Microstructure and mechanical properties of friction stir welded copper
Sakthivel, T.
Mukhopadhyay, J.
JOURNAL OF MATERIALS SCIENCE, 2007, 42 (19) : 8126 - 8129
[42] Investigation of the welding parameter dependent microstructure and mechanical properties of friction stir welded pure copper
Sun, Y. F.
Fujii, H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (26): : 6879 - 6886
[43] The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper joints
Sun, Y. F.
Fujii, H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (16-17): : 5470 - 5475
[44] Microstructural and Mechanical Properties of Pure Aluminum, 5083 and 7075 Alloys Joined by Friction Stir Welding
Yilmaz, Selim Sarper
MATERIALS TESTING, 2012, 54 (04) : 240 - 245
[45] Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method
Akbari, Mostafa
Asadi, Parviz
MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
[46] Microstructural evolution and mechanical properties of friction stir welded AA2017 with different initial microstructures
Mirjalili, A.
Aval, H. Jamshidi
Serajzadeh, S.
Kokabi, A. H.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2014, 228 (01) : 34 - 44
[47] The Effect of Rotational Speeds on the Microstructural and Mechanical Properties of Friction Stir Welded Dissimilar Aluminum Alloy Plates
Ngake, Tankiso Lawrence
Mjali, Kadephi Vuyolwethu
ENGINEERING TRANSACTIONS, 2024, 72 (04): : 443 - 459
[48] Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite
Feng, A. H.
Xiao, B. L.
Ma, Z. Y.
COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) : 2141 - 2148
[49] Effects of microstructural asymmetries across friction stir welded AA2024 joints on mechanical properties
Niu, Pengliang
Li, Wenya
Yang, Xiawei
Vairis, Achillefs
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2018, 23 (01) : 58 - 62
[50] Microstructural, Mechanical and Wear Properties of Friction Stir Welded AA6061/AlNp Composite Joints
Kumar, B. Ashok
Dinaharan, I
Murugan, N.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (01) : 651 - 666

← 1 2 3 4 5 →