Microstructural and mechanical properties of friction stir welded pure lead

被引：0
|
作者：
Gunen, A. [1 ]
Kanca, E. [1 ]
Demir, M. [1 ]
Cavdar, F. [2 ]
Mistikoglu, S. [1 ]
Cam, G. [1 ]
机构：
[1] Iskenderun Tech Univ, Mat Engn Dept, Fac Engn & Nat Sci, Antakya, Turkey
[2] Iskenderun Tech Univ, Dortyol Vocat High Sch, Antakya, Turkey
来源：
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES | 2018年 / 25卷 / 01期
关键词：
Lead; Toxic effect; Friction stir welding; Joint performance; AL-ALLOY PLATES; TEMPER CONDITION; ALUMINUM-ALLOYS; HEAT-TREATMENT; TENSILE PROPERTIES; MAGNESIUM ALLOY; DH36; STEEL; JOINTS; PARAMETERS; AA7075;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study focuses on the applicability of friction stir welding to pure Pb plates. The joint performances are evaluated by optical microscopy, microhardness measurements, notch impact tests and three point bending tests. The effects of the tool rotational speed (1500, 2000 and 2500 rev/min) and welding speed (72, 100 and 125 mm/min) on the joint performance are determined. The results indicate that the welded joints exhibit similar or higher mechanical properties than those of the base material. Optimal joint performance was achieved with a rotational speed of 1500 rev/min and welding speed of 100 mm/min.
引用
收藏
页码：26 / 32
页数：7
相关论文
共 50 条
  • [1] Microstructure and Mechanical properties of friction stir welded pure copper
    Raju, L. Suvarna
    Kumar, A.
    Prasad, S. Rajendra
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 499 - +
  • [2] Microstructural investigation of friction stir welded pure titanium
    Lee, WB
    Lee, CY
    Chang, WS
    Yeon, YM
    Jung, SB
    MATERIALS LETTERS, 2005, 59 (26) : 3315 - 3318
  • [3] Microstructural, mechanical and corrosive properties of friction stir welded aluminium joints
    Donne, CD
    Braun, R
    Staniek, G
    Jung, A
    Kaysser, WA
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1998, 29 (10) : 609 - 617
  • [4] Microstructural characteristics and mechanical properties of friction stir welded cupronickel alloy
    Zhou L.
    Min J.
    Lei S.
    He W.
    Huang Y.
    Feng J.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2019, 50 (04): : 814 - 820
  • [5] Investigation of Mechanical Properties of Friction Stir Welded pure Copper Plates
    Nagabharam, P.
    Rao, D. Srikanth
    Kumar, J. Manoj
    Gopikrishna, N.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (01) : 1264 - 1270
  • [6] Metallurgical and Mechanical Properties of Friction Stir-Welded Pure Titanium
    Regev, Michael
    Spigarelli, Stefano
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (13) : 6380 - 6386
  • [7] Microstructure and mechanical properties of friction stir welded pure Mo joints
    Fujii, Hidetoshi
    Sun, Yufeng
    Kato, Hideaki
    SCRIPTA MATERIALIA, 2011, 64 (07) : 657 - 660
  • [8] Evaluation of mechanical properties of friction stir welded commercially pure aluminium
    Kumar, S. Suresh
    Ravisankar, B.
    Chandar, Vishnu S.
    Raviram, R. P. Dhivakar
    3RD INTERNATIONAL CONFERENCE ON DESIGN, ANALYSIS, MANUFACTURING AND SIMULATION (ICDAMS 2018), 2018, 172
  • [9] Microstructural investigation and mechanical properties of dissimilar friction stir welded magnesium alloys
    Liu, Z.
    Liu, D.
    Xu, J.
    Zheng, X.
    Liu, Q.
    Xin, R.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2015, 20 (03) : 264 - 270
  • [10] Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints
    Abdollah-Zadeh, A.
    Saeid, T.
    Sazgari, B.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 460 (1-2) : 535 - 538
12345