Effect of Ni addition on formation of amorphous and nanocrystalline phase during mechanical alloying of Al-25 at.%Fe-(5,10) at.%Ni powders

被引：20

作者：

Zou, Y ^{[1
]}

Kusabiraki, K

Saji, S

机构：

[1] Toyama Univ, Grad Sch, Toyama 9308555, Japan

[2] Toyama Univ, Fac Engn, Toyama 9308555, Japan

来源：

MATERIALS RESEARCH BULLETIN | 2002年 / 37卷 / 07期

关键词：

intermetallic compounds; amorphous materials; X-ray diffraction; electron microscopy; differential scanning calorimetry (DSC);

D O I：

10.1016/S0025-5408(02)00762-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Al-Fe-Ni ternary powder mixtures containing 25 at.%Fe-5 at.%Ni and 25 at.%Fe-10 at.%Ni were mechanically alloyed by a high-energy planetary ball mill. Structural evolution of these powders during milling was investigated by X-ray diffraction technique and transmission electron microscopy. Almost complete amorphous phase in Al70Fe25Ni5 system is observed at the early milling stage. The amorphous phase transforms into metallic compound Al-5(Fe,Ni)(2) and then the compound changes to ordered AI(Fe,Ni) phase. The last milling products in Al70Fe25Ni5 system are amorphous phase plus nanocrystalline of the disordered AI(Fe,Ni) phase changed from the ordered AI(Fe,Ni) phase. During milling of Al65Fe25Ni10 system, alpha-Al and alpha-Fe solid solutions formed at the early stage change to the ordered AI(Fe,Ni) compound and at last the ordered phase changes to the disordered AI(Fe,Ni) phase. Ten percent of Ni addition promotes retardation of the formation of the amorphous phase. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：1307 / 1313

页数：7

共 50 条

[41] Effect of ceramics addition on formation tendency of amorphous phase in La55Al25Ni20 alloy
Haibara, T
Ozaki, K
Kobayashi, K
Nishio, T
Miwa, K
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1996, 60 (10) : 993 - 999
[42] Magnetic Properties of Al65Fe25Ni10 Nano Alloy Prepared by Mechanical Alloying
Cao Qizhi
Ouyang Yifang
Li Jianying
Du Yong
He Yuehui
RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 370 - 372
[43] EFFECT　OF　MILLING　INTENSITY　ON　STRUCTURAL　CHANGES　OF　MIXED　Al－Fe－Ni　POWDERS　IN　MECHANICAL　ALLOYING　PROCESS
Liu Zuyan
Liang Guoxian
Wang Erde(School of Materials Science and Engineering
Transactions of Nonferrous Metals Society of China, 1996, (03) : 143 - 145+149
[44] Effect of milling intensity on structural changes of mixed Al-Fe-Ni powders in mechanical alloying process
Liu, ZY
Liang, GX
Wang, ED
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1996, 6 (03) : 143 - &
[45] Structural and microstructural study of nanostructured Fe50Al40Ni10 powders produced by mechanical alloying
Hadef, F.
Otmani, A.
Djekoun, A.
Greneche, J. M.
MATERIALS CHARACTERIZATION, 2011, 62 (08) : 751 - 759
[46] Formation of nanocrystalline and amorphous phase of Al-Pb-Si-Sn-Cu powder during mechanical alloying
Ran, G
Zhou, JE
Xi, SQ
Li, PG
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 416 (1-2): : 45 - 50
[47] The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary Alloy
Proloy Nandi
Satyam Suwas
Subodh Kumar
Kamanio Chattopadhyay
Metallurgical and Materials Transactions A, 2013, 44 : 2591 - 2603
[48] The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary Alloy
Nandi, Proloy
Suwas, Satyam
Kumar, Subodh
Chattopadhyay, Kamanio
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (06): : 2591 - 2603
[49] CRYSTALLINE-TO-AMORPHOUS PHASE-TRANSITION IN AL-NI-CO SYSTEM DURING MECHANICAL ALLOYING
BENAMEUR, T
INOUE, A
MASUMOTO, T
MATERIALS TRANSACTIONS JIM, 1994, 35 (07): : 451 - 457
[50] Synthesis and Characterization Study of Al10Cr25Co20Ni25Fe20 High-Entropy Alloy Powders through Mechanical Alloying
Jeyasimman, D.
Vijayaraghavan, V.
Venkateshwara, Sri
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,

← 1 2 3 4 5 →