Effect of composition on the steam oxidation resistance of 9-12% Cr steel in the temperature range 550-650 °C

被引：0
|
作者：
Quadakkers, WJ
Ennis, PJ
Ehlers, J
Link, T
机构：
来源：
CORROSION IN POWER PLANTS | 1999年 / 1484卷
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The steam oxidation behaviour of power plant steels containing 1 - 12 % Cr has been investigated in tests at 550-650 degrees C for up to 10 000 h. It was found that the protective spinel scales that are formed in dry air are destroyed by the presence of water vapour in the test gas, and there is little difference between the steam oxidation rates at 600 and 650 degrees C of steels containing 1 - 11% Cr. Test using simple model steels have shown that additions of the spinel stabilizing element Co may provide a significant improvement in the steam oxidation behaviour of 9-10% Cr steels.
引用
收藏
页码：113 / 122
页数：10
相关论文
共 50 条
  • [31] High Temperature Oxidation Behavior of 9-12 % Cr Ferritic/Martensitic Steels in a Simulated Dry Oxyfuel Environment
    Chandra, K.
    Kranzmann, A.
    Neumann, R. Saliwan
    Oder, G.
    Rizzo, F.
    OXIDATION OF METALS, 2015, 83 (3-4): : 291 - 316
  • [32] LOW CYCLE FATIGUE OF 9-12% CR STEEL AT ELEVATED TEMPERATURE: CYCLIC DEFORMATION BEHAVIOR AND LIFE ASSESSMENT
    Zhao, Peng
    Xuan, Fu-Zhen
    Wu, De-Long
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 7A, 2016,
  • [33] Uniaxial mean stress relaxation of 9-12% Cr steel at high temperature: Experiments and viscoplastic constitutive modeling
    Wu, De-Long
    Xuan, Fu-Zhen
    Guo, Su-Juan
    Zhao, Peng
    INTERNATIONAL JOURNAL OF PLASTICITY, 2016, 77 : 156 - 173
  • [34] EFFECT OF CHEMICAL COMPOSITION ON CREEP RUPTURE STRENGTH OF 12 CR STEEL FOR ROTOR FORGING (ADVANCED 12 Cr ROTOR FOR HIGH TEMPERATURE STEAM TURBINE - I).
    Akio, Hizume
    Takeda, Yorimasa
    Takano, Yusaku
    Kinoshita, Shushi
    Kohno, Masayoshi
    Tsuchiyama, Tomohiro
    Transactions of the Iron and Steel Institute of Japan, 1986, 27 (01)
  • [35] Non-steady state carburisation of martensitic 9-12%Cr steels in CO2 rich gases at 550°C
    Young, D.
    Huczkowski, P.
    Olszewski, T.
    Huettel, T.
    Singheiser, L.
    Quadakkers, W. J.
    CORROSION SCIENCE, 2014, 88 : 161 - 169
  • [36] Influence of steam atmosphere on the crack propagation behavior of a 9-12% Cr ferritic/martensitic steel at temperatures from 300°C to 600°C depending on frequency and hold time
    Fischer, T.
    Kuhn, B.
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 119 : 62 - 77
  • [37] Effects of temperature and oxidation on threshold stress intensity factor of 12% Cr steel for steam turbine rotor component
    Jong-Hoon Lee
    Bum-Joon Kim
    Moon Ki Kim
    Byeong-Soo Lim
    Journal of Mechanical Science and Technology, 2013, 27 : 1273 - 1277
  • [38] Effects of temperature and oxidation on threshold stress intensity factor of 12% Cr steel for steam turbine rotor component
    Lee, Jong-Hoon
    Kim, Bum-Joon
    Kim, Moon Ki
    Lim, Byeong-Soo
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (05) : 1273 - 1277
  • [39] Temperature dependence of the oxide growth on aluminized 9-12%Cr ferritic-martensitic steels exposed to water vapour oxidation
    Sanchez, L.
    Bolivar, F. J.
    Hierro, M. P.
    Perez, F. J.
    THIN SOLID FILMS, 2009, 517 (11) : 3292 - 3298
  • [40] Significance of scale spalling for the lifetime of ferritic 9-10%Cr steels during oxidation in water vapour at temperatures between 550 and 650°C
    Ehlers, RJ
    Ennis, PJ
    Singheiser, L
    Quadakkers, WJ
    Link, T
    LIFETIME MODELLING OF HIGH TEMPERATURE CORROSION PROCESSES, 2001, (34): : 178 - 193
12345