Life cycle assessment (LCA) of waste management strategies: Landfilling, sorting plant and incineration

被引:425
|
作者
Cherubini, Francesco [1 ]
Bargigli, Silvia [2 ]
Ulgiati, Sergio [3 ]
机构
[1] Joanneum Res, A-8010 Graz, Austria
[2] Univ Siena, I-53100 Siena, Italy
[3] Univ Napoli Parthenope, Dipartimento Sci Ambiente, Ctr Direz, I-80133 Naples, Italy
关键词
LCA; Waste management; Landfill; MSW sorting plant; MSW incineration; MUNICIPAL SOLID-WASTE; SUSTAINABLE PROCESS INDEX; ENERGY; PERFORMANCE; EMISSION; RDF;
D O I
10.1016/j.energy.2008.08.023
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper focuses on a Life Cycle Assessment (LCA) of four waste management strategies: landfill without biogas utilization; landfill with biogas combustion to generate electricity; sorting plant which splits the inorganic waste fraction (used to produce electricity via Refuse Derived Fuels, RDF) from the organic waste fraction (used to produce biogas via anaerobic digestion); direct incineration of waste. These scenarios are applied to the waste amount and composition of the Municipality of Roma (Italy) and are evaluated under different points of view: global and local emissions, total material demands, total energy requirements and ecological footprints. Results, reliable for most of the European big cities, show landfill systems as the worst waste management options and significant environmental savings at global scale are achieved from undertaking energy recycling. Furthermore, waste treatments finalized to energy recovery provide an energy output that, in the best case, is able to meet the 15% of Roma electricity consumption. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2116 / 2123
页数:8
相关论文
共 50 条
  • [21] Application of life cycle assessment to landfilling
    Joan Rieradevall
    Xavier Domènech
    Pere Fullana
    [J]. The International Journal of Life Cycle Assessment, 1997, 2 : 141 - 144
  • [22] Improving the environmental performance of bio-waste management with life cycle thinking (LCT) and life cycle assessment (LCA)
    Manfredi, Simone
    Pant, Rana
    [J]. INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, 2013, 18 (01): : 285 - 291
  • [23] Improving the environmental performance of bio-waste management with life cycle thinking (LCT) and life cycle assessment (LCA)
    Simone Manfredi
    Rana Pant
    [J]. The International Journal of Life Cycle Assessment, 2013, 18 : 285 - 291
  • [24] Life Cycle Assessment (LCA) of an e-waste device
    Religa, Arkadiusz
    Dziewulska, Magdalena
    Lukasiewicz, Maria
    Malinowski, Mateusz
    [J]. MENDELNET 2019: PROCEEDINGS OF 26TH INTERNATIONAL PHD STUDENTS CONFERENCE, 2019, : 326 - 331
  • [25] COMPARATIVE ENVIRONMENTAL IMPACT ASSESSMENT OF THE LANDFILLING AND INCINERATION OF RESIDUAL WASTE IN KRAKOW
    Grzesik, Katarzyna
    [J]. ENVIRONMENT PROTECTION ENGINEERING, 2017, 43 (04): : 135 - 148
  • [26] LIFE CYCLE ASSESSMENT (LCA) OF MUNICIPAL SOLID WASTE MANAGEMENT SYSTEMS IN CLUJ COUNTY, ROMANIA
    Popita, Gabriela-Emilia
    Baciu, Calin
    Redey, Akos
    Frunzeti, Nicolae
    Ionescu, Artur
    Yuzhakova, Tatiana
    Popovici, Antoanela
    [J]. ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, 2017, 16 (01): : 47 - 58
  • [27] Application of life cycle assessment (LCA) for municipal solid waste management: a case study of Sakarya
    Yay, A. Suna Erses
    [J]. JOURNAL OF CLEANER PRODUCTION, 2015, 94 : 284 - 293
  • [28] Economic assessment of municipal waste management systems - case studies using a combination of life cycle assessment (LCA) and life cycle costing (LCC)
    Reich, MC
    [J]. JOURNAL OF CLEANER PRODUCTION, 2005, 13 (03) : 253 - 263
  • [29] Life cycle assessment (LCA) of digested sewage sludge incineration for heat and power production
    Abusoglu, Aysegul
    Ozahi, Emrah
    Kutlar, A. Ihsan
    Al-jaf, Hameed
    [J]. JOURNAL OF CLEANER PRODUCTION, 2017, 142 : 1684 - 1692
  • [30] Landfilling of municipal solid waste in a life cycle perspective
    Wanichpongpan, W
    Gheewala, SH
    Towprayoon, S
    Chiemchaisri, C
    [J]. 2003 3RD INTERNATIONAL SYMPOSIUM ON ENVIRONMENTALLY CONSCIOUS DESIGN AND INVERSE MANUFACTURING - ECODESIGN '03, 2003, : 163 - 170