Effects of hydrogen peroxide and alumina on surface characteristics of copper chemical-mechanical polishing in citric acid slurries

被引：23
|
作者：
Chen, JC [1 ]
Tsai, WT [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan
来源：
MATERIALS CHEMISTRY AND PHYSICS | 2004年 / 87卷 / 2-3期
关键词：
electropolishing; surface properties; X-ray photoelectron spectroscopy (XPS); atomic force microscopy (AFM);
D O I：
10.1016/j.matchemphys.2004.06.007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The roles of H2O2 and alumina on the changes of metal removal rate, surface passivation and surface morphology in citric acid (CA) base slurry in simulated Cu chemical-mechanical polishing (CMP) was investigated. X-ray photoelectron spectroscopy (XPS) analysis indicated that H2O2 assisted oxide formation while citric acid promoted anodic dissolution of copper in various slurries that contained 1 wt.% Al2O3. Atomic force microscopy (AFM) revealed that Al2O3 abrasive particles modified the surface morphology by inducing surface deformation. The results of open circuit potential (OCP) and removal rate measurements clearly demonstrated that there existed a synergistic effect due to the chelating and oxidizing agents in Cu CMP (C) 2004 Elsevier B.V. All rights reserved.
引用
收藏
页码：387 / 393
页数：7
相关论文
共 50 条
  • [31] Cerium oxide slurries in chemical-mechanical polishing: silica/ceria interactions
    Suphantharida, P
    Osseo-Asare, K
    [J]. CHEMICAL MECHANICAL PLANARIZATION V, 2002, 2002 (01): : 257 - 265
  • [32] Electrochemical characterization of ruthenium dissolution and chemical mechanical polishing in hydrogen peroxide based slurries
    Yadav, Kavita
    Manivannan, R.
    Victoria, S. Noyel
    [J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 1220 - 1228
  • [33] Characterization of slurries used for chemical-mechanical polishing (CMP) in the semiconductor industry
    Kuntzsch, T
    Witnik, U
    Hollatz, M
    Stintz, M
    Ripperger, S
    [J]. CHEMICAL ENGINEERING & TECHNOLOGY, 2003, 26 (12) : 1235 - 1239
  • [34] Chemical-mechanical polishing for polysilicon surface micromachining
    Yasseen, AA
    Mourlas, NJ
    Mehregany, M
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (01) : 237 - 242
  • [35] Surface removal rate in chemical-mechanical polishing
    Xia, X
    Ahmadi, G
    [J]. PARTICULATE SCIENCE AND TECHNOLOGY, 2002, 20 (03) : 187 - 196
  • [36] Influence of process parameters on chemical-mechanical polishing of copper
    Stavreva, Z
    Zeidler, D
    Plotner, M
    Drescher, K
    [J]. MICROELECTRONIC ENGINEERING, 1997, 37-8 (1-4) : 143 - 149
  • [37] Modification of the Preston equation for the chemical-mechanical polishing of copper
    Luo, Q
    Ramarajan, S
    Babu, SV
    [J]. THIN SOLID FILMS, 1998, 335 (1-2) : 160 - 167
  • [38] Influence of process parameters on chemical-mechanical polishing of copper
    Dresden Univ of Technology, Dresden, Germany
    [J]. Microelectron Eng, (143-149):
  • [39] Glycolic acid in hydrogen peroxide-based slurry for enhancing copper chemical mechanical polishing
    Tsai, TH
    Wu, YF
    Yen, SC
    [J]. MICROELECTRONIC ENGINEERING, 2005, 77 (3-4) : 193 - 203
  • [40] Chemical-mechanical polishing of copper and tantalum with silica abrasives
    Li, Y
    Hariharaputhiran, M
    Babu, SV
    [J]. JOURNAL OF MATERIALS RESEARCH, 2001, 16 (04) : 1066 - 1073
12345