A novel tool path generation method for robot milling process

被引：0
|
作者：
Zhang, Bin [1 ]
Huang, Bin-Bin [1 ]
Song, Ya-Qin [1 ]
Tang, Chen [1 ]
机构：
[1] China Jiliang Univ, Hangzhou, Zhejiang, Peoples R China
来源：
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHANICS AND MECHATRONICS (ICMM 2015) | 2016年
关键词：
Robots; Milling process; Tool path; Cuttercontract route method;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Robot milling process is an important development direction of robot technology, and the automatic tool path generation method is the key step of it. In this paper, an improved CC route method is presented to generate the tool path based on the geometric development platform of Open Cascade. By adjusting the distance of constrain planes dynamically, the inhomogeneous problem of traditional CC method is avoided and the robot milling precision can be improved. Based on the above, a corresponding CAM system is developed. Tool path of rough and fine milling process for free surfaces can be generated through this system. At last, the feasibility and precision of this method are validated by simulation and experiment.
引用
收藏
页码：936 / 945
页数：10
相关论文
共 50 条
  • [41] Tool path generation, simulation and optimization of a five-axis milling machine
    Munlin, M
    Makhanov, SS
    TENCON 2004 - 2004 IEEE REGION 10 CONFERENCE, VOLS A-D, PROCEEDINGS: ANALOG AND DIGITAL TECHNIQUES IN ELECTRICAL ENGINEERING, 2004, : D609 - D612
  • [42] NC MILLING TOOL PATH GENERATION FOR ARBITRARY POCKETS DEFINED BY SCULPTURED SURFACES
    SUH, YS
    LEE, K
    COMPUTER-AIDED DESIGN, 1990, 22 (05) : 273 - 284
  • [43] Constant engagement tool path generation to enhance machining accuracy in end milling
    Uddin, MS
    Ibaraki, S
    Matsubara, A
    Nishida, S
    Kakino, Y
    JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 2006, 49 (01) : 43 - 49
  • [44] Incomplete mesh-based tool path generation for optimum zigzag milling
    Hyun-Chul Kim
    Min-Yang Yang
    The International Journal of Advanced Manufacturing Technology, 2008, 35 : 803 - 813
  • [45] Tool path generation and modification for constant cutting forces in direction parallel milling
    Kim, Hyun-Chul
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 52 (9-12): : 937 - 947
  • [46] An integrated optimization of cutting parameters and tool path generation in ultraprecision raster milling
    Wang, S. J.
    To, S.
    Chen, X.
    Chen, X. D.
    Ouyang, X. B.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 75 (9-12): : 1711 - 1721
  • [47] Incomplete mesh-based tool path generation for optimum zigzag milling
    Kim, Hyun-Chul
    Yang, Min-Yang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 35 (7-8): : 803 - 813
  • [48] Smooth Flank Milling Tool Path Generation for Blisk Surface with Barrel Cutters
    Lu, Yaoan
    Chen, Shoufeng
    Wang, Chengyong
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (01): : 256 - 266
  • [49] A Novel Algorithm for Solving Cutting Tool Path Generation
    Li, Xun
    Chen, Ming
    2014 INTERNATIONAL CONFERENCE ON INFORMATION SCIENCE, ELECTRONICS AND ELECTRICAL ENGINEERING (ISEEE), VOLS 1-3, 2014, : 42 - 44
  • [50] A Novel Concrete Placing Path Generation Method Based on Error Zone with Concrete Placing Robot
    Fan, Siwen
    Li, Wanli
    Xie, Rui
    2023 3RD INTERNATIONAL CONFERENCE ON ROBOTICS, AUTOMATION AND ARTIFICIAL INTELLIGENCE, RAAI 2023, 2023, : 129 - 133
12345