Finite Element Modelling and Parametric Study of Three-Dimensional Semi-Rigid Composite Joints

被引：0
|
作者：
Gil, B. [1 ]
Goni, R. [1 ]
Bayo, E. [1 ]
机构：
[1] Univ Navarra, Sch Architecture, Dept Struct Anal & Design, E-31080 Pamplona, Spain
来源：
PROCEEDINGS OF THE TENTH INTERNATIONAL CONFERENCE ON COMPUTATIONAL STRUCTURES TECHNOLOGY | 2010年 / 93卷
关键词：
finite element model; semi-rigid composite connection; three-dimensional; parametric study; PART II; BEHAVIOR;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The behaviour of composite semi-rigid joints is being widely investigated. However, the investigation in composite joints has not been as prolific as in steel joints, and there still many issues to be investigated. One of these is the behaviour of three-dimensional semi-rigid composite joints, that is, columns with beams attached to both the strong and the weak axis. In order to pursue this end, a parametric study of the behaviour of three-dimensional semi-rigid composite joints has been carried out by means of an extensive finite element analysis using the software Abaqus. The finite element models have previously been validated by means of experimental results obtained from two tests. This paper describes all the parameters introduced in the model, which have leaded us to obtain accurate results. The conclusions obtained from a parametric study are also presented.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Analysis of demountable steel and composite frames with semi-rigid bolted joints
    Wang, Jia
    Uy, Brian
    Li, Dongxu
    [J]. STEEL AND COMPOSITE STRUCTURES, 2018, 28 (03): : 363 - 380
  • [42] Experimental and numerical model for space steel and composite semi-rigid joints
    Dabaon, Mohamed A.
    El-Boghdadi, Mahmoud H.
    Kharoob, Omnia F.
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2009, 65 (8-9) : 1864 - 1875
  • [43] Verification of a structural analysis of frameworks using three-dimensional semi-rigid stiffness matrix
    Takemura, T
    Nakagawa, H
    Hasegawa, K
    Sasaki, Y
    [J]. MOKUZAI GAKKAISHI, 1996, 42 (06): : 557 - 564
  • [44] A parametric analysis of steel and composite portal frames with semi-rigid connections
    Vellasco, PCGD
    de Andrade, SAL
    da Silva, JGS
    de Lima, LRO
    Brito, O
    [J]. ENGINEERING STRUCTURES, 2006, 28 (04) : 543 - 556
  • [45] Study on Remeshing Technique for Three-Dimensional Rigid-plastic Finite Element Simulation
    单德彬
    吕炎
    王真
    [J]. Journal of Harbin Institute of Technology(New series), 1997, (03) : 76 - 79
  • [46] Three-dimensional finite element simulation and parametric study for horizontal well hydraulic fracture
    Zhang, G. M.
    Liu, H.
    Zhang, J.
    Wu, H. A.
    Wang, X. X.
    [J]. JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2010, 72 (3-4) : 310 - 317
  • [47] Extended finite element method for three-dimensional crack modelling
    Sukumar, N
    Moës, N
    Moran, B
    Belytschko, T
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2000, 48 (11) : 1549 - 1570
  • [48] Three-dimensional finite element modelling of laser surface modification
    Labudovic, M
    Hu, D
    Kovacevic, R
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2000, 214 (08) : 683 - 692
  • [49] Three-dimensional finite element analysis of soil interaction with a rigid wheel
    Chiroux, RC
    Foster, WA
    Johnson, CE
    Shoop, SA
    Raper, RL
    [J]. APPLIED MATHEMATICS AND COMPUTATION, 2005, 162 (02) : 707 - 722
  • [50] Three-dimensional finite element modelling for soft tissues surgery
    Tillier, Y
    Paccini, A
    Durand-Reville, M
    Bay, F
    Chenot, JL
    [J]. CARS 2003: COMPUTER ASSISTED RADIOLOGY AND SURGERY, PROCEEDINGS, 2003, 1256 : 349 - 355
12345