The influence of nano-silica and zircon additions on the sintering and mechanical properties of in situ formed forsterite

被引：8
|
作者：
Wahsh, M. M. S. [1 ]
Othman, A. G. M. [1 ]
Abd El-Aleem, S. [2 ]
机构：
[1] Natl Res Ctr, Refractories Ceram & Bldg Mat Dept, Cairo 12311, Egypt
[2] Fayoum Univ, Fac Sci, Dept Chem, Al Fayyum, Egypt
来源：
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY | 2014年 / 20卷 / 06期
关键词：
Ceramics; Mechanical properties; Microstructure; X-ray diffraction; NANOCRYSTALLINE FORSTERITE; RICE HUSK; CRYSTALLIZATION; BIOCERAMICS; COMPOSITES;
D O I：
10.1016/j.jiec.2013.12.100
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
The influence of nano-silica and zircon additions on the sintering and mechanical properties of in situ formed forsterite fired at 1550 degrees C for 2 h was investigated. The results indicated that, nano-silica improved in situ formed forsterite at the firing temperature, while zircon additions enhanced the sintering of the investigated samples. XRD analysis and SEM examination observed a good crystallinity of in situ formed forsterite with nano-silica and/or zircon additions. Densification parameter (BD similar to 3.22 g/cm(3) and AP similar to 5.82%), cold crushing strength (CCS similar to 285 MPa) and micro-hardness (Hv similar to 660) were enhanced with zircon additions. (C) 2014 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码：3984 / 3988
页数：5
相关论文
共 50 条
  • [31] Mechanical Properties of Recycled Concrete Reinforced by Basalt Fiber and Nano-silica
    Yonggui Wang
    Xuetong Zhang
    Jinjin Fang
    Xingguo Wang
    KSCE Journal of Civil Engineering, 2022, 26 : 3471 - 3485
  • [32] Influence of ionic liquid on the polymer-filler coupling and mechanical properties of nano-silica filled elastomer
    Zhang, Xumin
    Xue, Xiaodong
    Jia, Hongbing
    Wang, Jingyi
    Ji, Qingmin
    Xu, Zhaodong
    JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (07)
  • [33] Influence of halloysite nanotube on hydration products and mechanical properties of oil well cement slurries with nano-silica
    Liu, Huiting
    Jin, Jianzhou
    Yu, Yongjin
    Liu, Huimin
    Liu, Shuoqiong
    Shen, Jiyun
    Xia, Xiujian
    Ji, Hongfei
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 247
  • [34] Experimental study on the influence of water/cement ratio and polypropylene fiber on the mechanical properties of nano-silica concretes
    Najarchi, Mohsen, 2018, Bauverlag BV GmbH (71):
  • [35] Influence of Nano-Silica on Enhancing the Mechanical Properties of Sisal/Kevlar Fiber Reinforced Polyester Hybrid Composites
    M. Somaiah Chowdary
    G. Raghavendra
    M. S. R. Niranjan Kumar
    S. Ojha
    Vasavi Boggarapu
    Silicon, 2022, 14 : 539 - 546
  • [36] Influence of Nano-Silica on Enhancing the Mechanical Properties of Sisal/Kevlar Fiber Reinforced Polyester Hybrid Composites
    Chowdary, M. Somaiah
    Raghavendra, G.
    Kumar, M. S. R. Niranjan
    Ojha, S.
    Boggarapu, Vasavi
    SILICON, 2022, 14 (02) : 539 - 546
  • [37] Properties of concrete incorporating nano-silica
    Said, A. M.
    Zeidan, M. S.
    Bassuoni, M. T.
    Tian, Y.
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 36 : 838 - 844
  • [38] Experimental study on the influence of water/cement ratio and polypropylene fiber on the mechanical properties of nano-silica concretes
    Piroti, Saber
    Najarchi, Mohsen
    Hezavehi, Emadaldin
    Najafizadeh, Mohammad Mandi
    Mirhosseini, Seyyed Mohamad
    ZKG INTERNATIONAL, 2018, 71 (05): : 56 - 65
  • [39] Influence of nano-silica and nano-ferrite particles on mechanical and durability of sustainable concrete: A review
    Mohamed, Abdeliazim Mustafa
    Tayeh, Bassam A.
    Ahmed, Tamer I.
    Bashir, Maaz Osman
    Tobbala, Dina E.
    NANOTECHNOLOGY REVIEWS, 2025, 14 (01)
  • [40] Influence of nano-silica on early age and durability properties of cement mortars
    Ltifi, Mounir
    Zafar, Idrees
    ADVANCES IN CEMENT RESEARCH, 2021, 33 (09) : 386 - 397
12345