The influence of nano-silica and zircon additions on the sintering and mechanical properties of in situ formed forsterite

被引:8
|
作者
Wahsh, M. M. S. [1 ]
Othman, A. G. M. [1 ]
Abd El-Aleem, S. [2 ]
机构
[1] Natl Res Ctr, Refractories Ceram & Bldg Mat Dept, Cairo 12311, Egypt
[2] Fayoum Univ, Fac Sci, Dept Chem, Al Fayyum, Egypt
关键词
Ceramics; Mechanical properties; Microstructure; X-ray diffraction; NANOCRYSTALLINE FORSTERITE; RICE HUSK; CRYSTALLIZATION; BIOCERAMICS; COMPOSITES;
D O I
10.1016/j.jiec.2013.12.100
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The influence of nano-silica and zircon additions on the sintering and mechanical properties of in situ formed forsterite fired at 1550 degrees C for 2 h was investigated. The results indicated that, nano-silica improved in situ formed forsterite at the firing temperature, while zircon additions enhanced the sintering of the investigated samples. XRD analysis and SEM examination observed a good crystallinity of in situ formed forsterite with nano-silica and/or zircon additions. Densification parameter (BD similar to 3.22 g/cm(3) and AP similar to 5.82%), cold crushing strength (CCS similar to 285 MPa) and micro-hardness (Hv similar to 660) were enhanced with zircon additions. (C) 2014 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:3984 / 3988
页数:5
相关论文
共 50 条
  • [1] The influence of surface chemistry of nano-silica on microstructure, optical and mechanical properties of the nano-silica containing clear-coats
    Ranjbar, Zahra
    Rastegar, Saeed
    PROGRESS IN ORGANIC COATINGS, 2009, 65 (01) : 125 - 130
  • [3] Effect of nano-silica on the mechanical properties of LWC
    Nashat, Alghrairi
    Abd Aziz, Farah Nora Aznieta Binti
    Rashid, Suraya Binti Abdul
    Bin Mohamed, Mohd Zuhri
    Ibrahim, Amer Mohammed
    OPEN ENGINEERING, 2024, 14 (01):
  • [4] Preparation and properties of polylactide/nano-silica in situ composites
    Liu, Li-zhu
    Ma, Hong-jie
    Zhu, Xing-song
    Fan, Yu-jiang
    Jin, Zhen-hao
    PIGMENT & RESIN TECHNOLOGY, 2010, 39 (01) : 27 - 31
  • [5] Influence of nonuniform network on mechanical properties of nano-silica reinforced silicone rubber
    Chen, Wanjuan
    Zeng, Xingrong
    Li, Hongqiang
    Lai, Xuejun
    Fang, Weizhen
    Zeng, Xiang
    JOURNAL OF ELASTOMERS AND PLASTICS, 2017, 49 (04): : 332 - 344
  • [6] Effect of nano-silica on the mechanical, thermal, and crystalline properties of poly(vinyl alcohol)/nano-silica films
    Wang, Chao
    Wei, Jingwei
    Xia, Bingxiang
    Chen, Xian
    He, Bobing
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 128 (03) : 1652 - 1658
  • [8] Influences of nano-alumina and nano-silica on sintering and mechanical property of corundum refractories
    Zhao, Huizhong
    Wu, Bin
    Wang, Houzhi
    Zhang, Wenjie
    Gu, Huazhi
    Zhao, Junfeng
    Wei, Xiaofang
    Naihuo Cailiao/Refractories, 2002, 36 (02):
  • [9] Sintering and characterization of in situ formed porous cordierite ceramics with nano boehmite additions
    Mansour, T. S.
    Wahsh, M. M. S.
    Othman, A. G. M.
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (05) : 2727 - 2736
  • [10] In-situ crosslinking induced structure development and mechanical properties of nano-silica/polypropylene composites
    Zhou, Tong Hui
    Ruan, Wen Hong
    Rong, Min Zhi
    Zhang, Ming Qiu
    ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 733 - +