Investigation of cutting forces, surface roughness and tool wear during Laser assisted machining of SKD11Tool steel

被引：13
|
作者：
Xavierarockiaraj, S. [1 ]
Kuppan, P. [1 ]
机构：
[1] VIT Univ, Sch Mech & Bldg Sci, Vellore 632014, Tamil Nadu, India
来源：
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014) | 2014年 / 97卷
关键词：
SKD; 11; laser assisted machining; material removal temperature; Nd: YAG laser;
D O I：
10.1016/j.proeng.2014.12.316
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present work deals with the machining of Tool steel-SKD 11 which is widely used in industries for making dies and molds. It is chosen for its toughness, strength, and hardness maintained up to high temperature. However, the properties of tool steel make it extremely difficult and expensive to machine using conventional approaches. Thermally assisted machining has been found wide spread application in recent years to improve machinability of difficult-to-cut materials. This research paper presents the outcome of an investigation on laser assisted turning of SKD 11 using TiN coated ceramic inserts. Extensive heating studies are carried out to understand the laser-material interaction. The LAM parameters were selected based on the outcome from heating study. In this study, the effect of laser beam on cutting forces, surface temperature, surface roughness and tool wear are analysed over wide range of cutting speeds and feed rate and the results are compared with conventional machining. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：1657 / 1666
页数：10
相关论文
共 50 条
  • [1] The Impact of High-Speed and Thermal-Assisted Machining on Tool Wear and Surface Roughness during Milling of SKD11 Steel
    Mac, Thi-Bich
    Luyen, The-Thanh
    Nguyen, Duc-Toan
    [J]. METALS, 2023, 13 (05)
  • [2] Effect of laser scan speed on surface temperature, cutting forces and tool wear during laser assisted machining of Alumina
    Kannan, Venkatesh M.
    Kuppan, P.
    Kumar, Senthil A.
    Kumar, Ramesh K.
    Jegaraj, John Rozario J.
    [J]. 12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1647 - 1656
  • [3] Investigation of tool wear and surface roughness on machining of titanium alloy with MT-CVD cutting tool
    Maity, Kalipada
    Pradhan, Swastik
    [J]. INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346
  • [4] The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel
    Natasha, A. R.
    Ghani, J. A.
    Haron, C. H. Che
    Syarif, J.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017), 2018, 290
  • [5] Evaluation of the cutting forces, the surface roughness, and the tool wear characteristics during machining of cobalt-based superalloy Haynes 188 with ceramic cutting tool
    Altin, Abdullah
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (03) : 805 - 813
  • [6] Investigation of Cutting Force Tool Tip Temperature and Surface Roughness during Dry Machining of Spring Steel
    Vasu, M.
    Nayaka, Shivananda H.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 7141 - 7149
  • [7] Comparison of Tool Wear, Surface Roughness, Cutting Forces, Tool Tip Temperature, and Chip Shape during Sustainable Turning of Bearing Steel
    Demirpolat, Havva
    Binali, Ruestem
    Patange, Abhishek D. D.
    Pardeshi, Sujit S. S.
    Gnanasekaran, Sakthivel
    [J]. MATERIALS, 2023, 16 (12)
  • [8] Prediction of surface roughness in Electrical Discharge Machining of SKD 11 TOOL steel using Recurrent Elman Networks
    Das, R.
    Pradhan, M. K.
    Das, C.
    [J]. JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2013, 7 (01): : 67 - 71
  • [9] Tool wear and surface roughness during machining of high-temperature aluminized steel
    Sasaki, Tomohiro
    Yakou, Takao
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 197 (1-3) : 89 - 95
  • [10] Estimation of tool wear according to cutting forces during machining procedure
    Anicic, Obrad
    Jovic, Srdjan
    Stanojevic, Nenad
    Marsenic, Mladen
    Pejovic, Branko
    Nedic, Bogdan
    [J]. SENSOR REVIEW, 2018, 38 (02) : 176 - 180
12345