The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel

被引：9

作者：

Natasha, A. R. ^{[1
]}

Ghani, J. A. ^{[2
]}

Haron, C. H. Che ^{[2
]}

Syarif, J. ^{[3
]}

机构：

[1] IIUM, Dept Mfg & Mat Engn, Jalan Gombak, Kuala Lumpur 53100, Malaysia

[2] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia

[3] Univ Sharjah, Dept Mech Engn, Coll Engn, POB 27272, Sharjah, U Arab Emirates

来源：

INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017) | 2018年 / 290卷

关键词：

INCONEL; 718; DRY; PERFORMANCE; ALLOY; MQL; INTEGRITY; FRICTION; FORCES;

D O I：

10.1088/1757-899X/290/1/012017

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Sustainable machining by using cryogenic coolant as the cutting fluid has been proven to enhance some machining outputs. The main objective of the current work was to investigate the influence of machining conditions; dry and cryogenic, as well as the cutting tool wear on the machined surface roughness of AISI 4340 steel. The experimental tests were performed using chemical vapor deposition (CVD) coated carbide inserts. The value of machined surface roughness were measured at 3 cutting intervals; beginning, middle, and end of the cutting based on the readings of the tool flank wear. The results revealed that cryogenic turning had the greatest influence on surface roughness when machined at lower cutting speed and higher feed rate. Meanwhile, the cutting tool wear was also found to influence the surface roughness, either improving it or deteriorating it, based on the severity and the mechanism of the flank wear.

引用

页数：6

共 50 条

[1] Influence of the cutting condition on the wear and the surface roughness in the steel AISI 4140 with mixed ceramic and diamond tool
Aouad, Razika
Amara, Idriss
[J]. JOURNAL OF ENGINEERING DESIGN AND TECHNOLOGY, 2018, 16 (06) : 828 - 836
[2] Investigation and Optimization of Machining Parameters Influence on Surface Roughness in Turning AISI 4340 Steel
Deepanraj, Balakrishnan
Raman, Lakshmipathi Anantha
Senthilkumar, Natarajan
Shivasankar, Jayakumar
[J]. FME TRANSACTIONS, 2020, 48 (02): : 383 - 390
[3] Uncertainties of Surface Roughness and Tool Wear in Machining of AISI 4140 Alloy Steel
Ghosh, Shuvajit
Mandal, Nirmal Kumar
[J]. JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2024, 23 (03) : 509 - 530
[4] Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel
Guangming Zheng
Xiang Cheng
Li Li
Rufeng Xu
Yebing Tian
[J]. Journal of Mechanical Science and Technology, 2019, 33 : 341 - 349
[5] Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel
Zheng, Guangming
Cheng, Xiang
Li, Li
Xu, Rufeng
Tian, Yebing
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (01) : 341 - 349
[6] Effect of cutting speed on temperature cutting tools and surface roughness of AISI 4340 steel
Lubis, Sobron M.
Adianto, Steven Darmawan'
Ericsen
[J]. TARUMANAGARA INTERNATIONAL CONFERENCE ON THE APPLICATIONS OF TECHNOLOGY AND ENGINEERING, 2019, 508
[7] Analysis of tool wear and surface roughness in machining of AISI 4462 duplex stainless steel
Sonmez, Fikret
[J]. MATERIALS TESTING, 2023, 65 (10) : 1561 - 1570
[8] The effects of cutting environment on surface roughness and tool life in milling of AISI 4340
Muhamad, Shalina Sheik
Ghani, Jaharah A.
Haron, Che Hassan Che
Yazid, Hafizal
[J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
[9] SURFACE INTEGRITY IN MACHINING AISI 4340 STEEL
BAILEY, JA
JEELANI, S
BECKER, SE
[J]. JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1976, 98 (03): : 999 - 1007
[10] Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel
Dhar, NR
Kamruzzaman, M
Ahmed, M
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (02) : 299 - 304

← 1 2 3 4 5 →