The Research of the Surface Profile after Profiling of Inconel 738LC

被引：6
|
作者：
Kyncl, Jiri [1 ]
Beranek, Ladislav [1 ]
Kolarik, Kamil [2 ]
Pala, Z. [2 ]
机构：
[1] Czech Tech Univ, Dept Machining Proc Planning & Metrol, Fac Mech Engn, CR-16635 Prague, Czech Republic
[2] Czech Tech Univ, Fac Nucl Sci & Phys Engn, Dept Solid State Engn, Prague, Czech Republic
来源：
24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 | 2014年 / 69卷
关键词：
inconel; 738; lc; superalloy; milling; machining; roughness;
D O I：
10.1016/j.proeng.2014.03.078
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Production of so-called superalloys is increasing in the present. This paper is about Inconel 738 LC. There are main mechanical properties as well as chemical composition of Inconel 738 LC in this paper. Special properties of superalloys cause, that they are very hard machining materials, mainly thanks to their high thermal stability during machining. For this reason it was necessary to measure the surface roughness after machining turbine blades made of Inconel 738LC depending on profiling. Roughing and finishing of Inconel 738 LC was used to get nearly the best parameters of the surface roughness. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：974 / 979
页数：6
相关论文
共 50 条
  • [31] Numerical modeling of inconel 738LC deposition welding: Prediction of residual stress induced cracking
    Danis, Yann
    Lacoste, Eric
    Arvieu, Corinne
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (14) : 2053 - 2061
  • [32] Damage evaluation of inconel 738LC nickel-base superalloy in creep-fatigue
    Ibuchi, H.
    Kimura, H.
    Sakane, M.
    Ohnami, M.
    Muramatsu, M.
    Fujiyama, K.
    Proceedings of The Japan Congress on Materials Research, 1991,
  • [33] The Effect of Brazing Temperature on Shear Strength of Nickel Based Superalloy (Inconel 738LC) Joints
    Khathem, S.
    Mohammed, M.
    Hashim, F.
    ACTA PHYSICA POLONICA A, 2019, 135 (05) : 919 - 921
  • [34] GRAIN-REFINEMENT OF SUPERALLOY IN 738LC
    ZHEN, BL
    LIU, L
    ZHONG, ZY
    BANERJI, A
    REIF, W
    METALL, 1994, 48 (02): : 118 - 122
  • [35] Control of Inconel 738LC superalloy microstructure with the aid of a precipitate dissolution semi-analytical modeling
    Danis, Yann
    Arvieu, Corinne
    Lacoste, Eric
    Quenisset, Jean-Michel
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2010, 18 (08)
  • [36] Influence of sintering temperature on the corrosion and wear behaviour of spark plasma–sintered Inconel 738LC alloy
    Olugbenga Ogunbiyi
    Tamba Jamiru
    Rotimi Sadiku
    Lodewyk Beneke
    Oluwagbenga Adesina
    Juwon Fayomi
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 4195 - 4206
  • [37] Spark Plasma Sintering of Graphene-Reinforced Inconel 738LC Alloy: Wear and Corrosion Performance
    Ogunbiyi, Olugbenga
    Jamiru, Tamba
    Sadiku, Rotimi
    Adesina, Oluwagbenga
    Adesina, Olanrewaju Seun
    Obadele, Babatunde Abiodun
    METALS AND MATERIALS INTERNATIONAL, 2022, 28 (03) : 695 - 709
  • [38] A Study on the Effect of Process Parameters on the Properties of Joint in TLP-Bonded Inconel 738LC Superalloy
    V. Jalilvand
    H. Omidvar
    H. R. Shakeri
    M. R. Rahimipour
    Metallurgical and Materials Transactions B, 2013, 44 : 1222 - 1231
  • [39] Wide Gap Brazing of Inconel 738LC Nickel-Based Superalloy: Metallurgical and Mechanical Characteristics
    Alinaghian, H.
    Farzadi, A.
    Marashi, P.
    Pouranvari, M.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (12): : 6283 - 6293
  • [40] Spark Plasma Sintering of Graphene-Reinforced Inconel 738LC Alloy: Wear and Corrosion Performance
    Olugbenga Ogunbiyi
    Tamba Jamiru
    Rotimi Sadiku
    Oluwagbenga Adesina
    Olanrewaju Seun Adesina
    Babatunde Abiodun Obadele
    Metals and Materials International, 2022, 28 : 695 - 709
12345