The Research of the Surface Profile after Profiling of Inconel 738LC

被引：6
|
作者：
Kyncl, Jiri [1 ]
Beranek, Ladislav [1 ]
Kolarik, Kamil [2 ]
Pala, Z. [2 ]
机构：
[1] Czech Tech Univ, Dept Machining Proc Planning & Metrol, Fac Mech Engn, CR-16635 Prague, Czech Republic
[2] Czech Tech Univ, Fac Nucl Sci & Phys Engn, Dept Solid State Engn, Prague, Czech Republic
来源：
24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 | 2014年 / 69卷
关键词：
inconel; 738; lc; superalloy; milling; machining; roughness;
D O I：
10.1016/j.proeng.2014.03.078
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Production of so-called superalloys is increasing in the present. This paper is about Inconel 738 LC. There are main mechanical properties as well as chemical composition of Inconel 738 LC in this paper. Special properties of superalloys cause, that they are very hard machining materials, mainly thanks to their high thermal stability during machining. For this reason it was necessary to measure the surface roughness after machining turbine blades made of Inconel 738LC depending on profiling. Roughing and finishing of Inconel 738 LC was used to get nearly the best parameters of the surface roughness. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：974 / 979
页数：6
相关论文
共 50 条
  • [1] Real Structure of Milled Inconel 738LC Turbine Blades
    Pala, Zdenek
    Kolarik, Kamil
    Beranek, Libor
    Capek, Jiri
    Kyncl, Jiri
    Musalek, Radek
    Ganev, Nikolaj
    RESIDUAL STRESSES IX, 2014, 996 : 646 - +
  • [2] Ultrasonic assisted deep drilling of Inconel 738LC superalloy
    Baghlani, V.
    Mehbudi, P.
    Akbari, J.
    Sohrabi, M.
    PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM), 2013, 6 : 571 - 576
  • [3] Analysis of the cyclic stress in Inconel 738LC superalloy at elevated temperature
    Petrenec, M.
    Polak, J.
    Obrtlik, K.
    ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008, 2008, : 1214 - 1218
  • [4] Spark plasma sintering of Inconel 738LC: densification and microstructural characteristics
    Ogunbiyi, O. F.
    Sadiku, E. R.
    Jamiru, T.
    Adesina, O. T.
    Beneke, L. W.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
  • [5] Non-Destructive Inspection of Surface Integrity in Milled Turbine Blades of Inconel 738LC
    Kolarik, Kamil
    Pala, Zdenek
    Capek, Jiri
    Beranek, Libor
    Vyskocil, Zdenek
    Ganev, Nikolaj
    EXPERIMENTAL STRESS ANALYSIS 51, 2014, 486 : 9 - +
  • [6] Failure analysis of a gas turbine blade made of Inconel 738LC alloy
    Mazur, Z
    Luna-Ramírez, A
    Juárez-Islas, JA
    Campos-Amezcua, A
    ENGINEERING FAILURE ANALYSIS, 2005, 12 (03) : 474 - 486
  • [7] Microstructural characteristics and thermophysical properties of spark plasma sintered Inconel 738LC
    Ogunbiyi, O. F.
    Jamiru, T.
    Sadiku, E. R.
    Beneke, L. W.
    Adesina, O. T.
    Adegbola, T. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (1-4): : 1425 - 1436
  • [8] DAMAGE MECHANISMS OF INCONEL 738LC UNDERCREEP-FATIGUE LOADING CONDITIONS
    M.Yamamoto
    T.Ogata
    ActaMetallurgicaSinica(EnglishLetters), 1998, (06) : 470 - 476
  • [9] Microstructural characteristics and thermophysical properties of spark plasma sintered Inconel 738LC
    O. F. Ogunbiyi
    T. Jamiru
    E. R. Sadiku
    L. W. Beneke
    O. T. Adesina
    T. A. Adegbola
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 1425 - 1436
  • [10] Low cycle fatigue of cast superalloy Inconel 738LC at high temperature
    Obrtlik, Karel
    Chlupova, Alice
    Petrenec, Martin
    Pokak, Jaroslav
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII, 2008, 385-387 : 581 - 584
12345