Experimental Determination of Thermal Contact Resistance of Helically Serrated Finned Tubes with Different Bonding Extents

被引:0
|
作者
Seif, Shayan [1 ]
Hamidi, Ali Asghar [2 ]
Faghedi, Mohamadreza [3 ]
机构
[1] Univ Tehran, Fac Chem Engn, Tehran 14174, Iran
[2] Univ Tehran, Fac Chem Engn, Associate Prof Chem Engn, Tehran, Iran
[3] Qual Manager Mapna Co, M Sc Mat Sci & Engn, Tehran, Iran
关键词
thermal contact resistance; serrated finned tubes; bonding; heat transfer; HEAT-TRANSFER COEFFICIENT; EXCHANGERS; SPACINGS;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
In this article, helically serrated finned tubes, which are generally used in heat recovery steam generator (HRSG) boilers in combined cycle power plants, are experimentally studied, in order to find their thermal contact resistance (TCR) values in different conditions. Temperature, air velocity and fin-to-tube bonding extent were the variables and a precise methodology was performed to extract the TCR values from the obtained data. The results showed that TCR decreases by increasing the air velocity and the bonding extent, but temperature has a negligible effect on it. Moreover, the TCR values showed a good consistency in order of magnitude when compared to similar systems studied before.
引用
收藏
页数:5
相关论文
共 50 条
  • [31] An Experimental Investigation on Thermal Contact Resistance Across Metal Contact Interfaces
    Luo, Xiaobing
    Feng, Han
    Liu, Jv
    Liu, Ming Lu
    Liu, Sheng
    2011 12TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY AND HIGH DENSITY PACKAGING (ICEPT-HDP), 2011, : 733 - 738
  • [32] CORRELATION OF EXPERIMENTAL-DATA ON AERODYNAMIC RESISTANCE OF STAGGERED BUNDLES OF TRANSVERSELY-FINNED AND SMOOTH TUBES
    LEGKII, VM
    TEREKH, AM
    SUSHKO, OV
    THERMAL ENGINEERING, 1991, 38 (02) : 93 - 97
  • [33] Thermal-hydrodynamic analysis for internally interrupted-finned tubes: Experimental, numerical and performance study
    Salem, O. H.
    Hegazy, Ahmed
    Yousef, K.
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2025, 111
  • [34] Experimental investigation of a solar thermal storage heater assembled with finned heat pipe and collective vacuum tubes
    Bai, Yuchen
    He, Xiufen
    Liu, Yang
    Duan, Jianguo
    Wang, Yaxiong
    Han, Xiaoxing
    ENERGY CONVERSION AND MANAGEMENT, 2018, 166 : 463 - 473
  • [35] Thermal contact resistance of a bimetallic finned pipe and a method of calculating interference between contacting surfaces
    Kuntysh, VB
    Stenin, NN
    CHEMICAL AND PETROLEUM ENGINEERING, 1997, 33 (06) : 665 - 671
  • [36] Experimental characterization methods for thermal contact resistance: A review
    Xian, Yaoqi
    Zhang, Ping
    Zhai, Siping
    Yuan, Peng
    Yang, Daoguo
    APPLIED THERMAL ENGINEERING, 2018, 130 : 1530 - 1548
  • [37] Experimental Investigation of the Reduction of Contact Thermal Resistance.
    Danilov, Yu.I.
    Mikheev, Yu.S.
    Mikhailova, T.V.
    Orlin, S.A.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Mashinostroenie, 1974, (10): : 73 - 77
  • [38] Thermal contact resistance of a bimetallic finned pipe and a method of calculating interference between contacting surfaces
    V. B. Kuntysh
    N. N. Stenin
    Chemical and Petroleum Engineering, 1997, 33 : 665 - 671
  • [39] Decrease in thermal contact conductance and the contact pressure of finned-tube heat exchangers assembled with different size bullets
    Madhusudana, Chakravarti
    Cheng, Wui-Wai
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (07): : 907 - 911
  • [40] Experimental evaluation of thermal performance of two different finned latent heat storage systems
    Hassan, Ayad K.
    Abdulateef, Jasim
    Mahdi, Mustafa S.
    Hasan, Ahmed F.
    CASE STUDIES IN THERMAL ENGINEERING, 2020, 21