Suspension plasma sprayed composite coating using amorphous powder feedstock

被引：21
|
作者：
Chen, Dianying [1 ]
Jordan, Eric H. [2 ]
Gell, Maurice [1 ]
机构：
[1] Univ Connecticut, Inst Mat Sci, Dept Chem Mat & Biomol Engn, Storrs, CT 06269 USA
[2] Univ Connecticut, Dept Mech Engn, Storrs, CT 06269 USA
来源：
APPLIED SURFACE SCIENCE | 2009年 / 255卷 / 11期
关键词：
Alumina; Zirconia; Suspension plasma spray; Amorphous powders; Nanocomposites; THERMAL BARRIER COATINGS; TITANIA COATINGS; SPLAT FORMATION; ZIRCONIA; MICROSTRUCTURE; FABRICATION; RESISTANCE; TIO2;
D O I：
10.1016/j.apsusc.2009.01.038
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Al(2)O(3)-ZrO(2) composite coatings were deposited by the suspension plasma spray process using molecularly mixed amorphous powders. X-ray diffraction (XRD) analysis shows that the as-sprayed coating is composed of alpha-Al(2)O(3) and tetragonal ZrO(2) phases with grain sizes of 26 nm and 18 nm, respectively. The as-sprayed coating has 93% density with a hardness of 9.9 GPa. Heat treatment of the as-sprayed coating reveals that the Al(2)O(3) and ZrO(2) phases are homogeneously distributed in the composite coating. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：5935 / 5938
页数：4
相关论文
共 50 条
  • [21] Adhesion of YSZ suspension plasma-sprayed coating on smooth and thin substrates
    Vert, R.
    Chicot, D.
    Dublanche-Tixier, C.
    Meillot, E.
    Vardelle, A.
    Mariaux, G.
    SURFACE & COATINGS TECHNOLOGY, 2010, 205 (04): : 999 - 1003
  • [22] Investigating the in-flight droplets' atomization in suspension plasma-sprayed coating
    Dalir, E.
    Dolatabadi, A.
    Mostaghimi, J.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 182
  • [23] Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating
    Kossman, S.
    Chicot, D.
    Decoopman, X.
    Iost, A.
    van Gorp, A.
    Meillot, E.
    Puchi-Cabrera, E. S.
    Santana, Y. Y.
    Staia, M. H.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (08) : 1350 - 1361
  • [24] Sliding properties of composite sprayed coating between bronze powder and solid lubricant
    Kobayashi, T
    Maruyama, T
    Yasuda, T
    MATERIALS TRANSACTIONS, 2003, 44 (05) : 1024 - 1028
  • [25] Novel Ni/C composite powder and its derived thermal sprayed coating
    State Key Lab. of Multi-Phase Complex System, Inst. Process Eng., Chinese Acad. of Sci., Beijing 100080, China
    不详
    Guocheng Gongcheng Xuebao, 2007, 6 (1221-1228):
  • [26] Characteristics of plasma sprayed coatings produced from carbon nanotube doped ceramic powder feedstock
    Jambagi, Sudhakar C.
    Kar, Simanchal
    Brodard, Pierre
    Bandyopadhyay, P. P.
    MATERIALS & DESIGN, 2016, 112 : 392 - 401
  • [27] Time-Dependent Passivation Performance of Plasma Sprayed FeCrMoCBY Amorphous Coating
    Wang, Miqi
    Zhou, Zehua
    Yi, Yu
    Zhang, Xin
    COATINGS, 2023, 13 (05)
  • [28] Effect of powder particle size on wear resistance of plasma sprayed molybdenum coating
    Manjunatha, S. S.
    Basavarajappa, S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2014, 228 (07) : 789 - 796
  • [29] Performance characterization and improvement of tungsten coating atmospheric plasma sprayed with submicron powder
    Wang, Fan
    Huang, Jianjun
    SURFACE & COATINGS TECHNOLOGY, 2014, 254 : 61 - 64
  • [30] Microstructure and Thermal Behaviour of Plasma Sprayed Zirconia/Alumina Composite Coating
    Kobayashi, A.
    Ando, Y.
    Kurokawa, K.
    Hejwowski, T.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (10) : 8853 - 8858
12345