Suspension plasma sprayed composite coating using amorphous powder feedstock

被引：21
|
作者：
Chen, Dianying [1 ]
Jordan, Eric H. [2 ]
Gell, Maurice [1 ]
机构：
[1] Univ Connecticut, Inst Mat Sci, Dept Chem Mat & Biomol Engn, Storrs, CT 06269 USA
[2] Univ Connecticut, Dept Mech Engn, Storrs, CT 06269 USA
来源：
APPLIED SURFACE SCIENCE | 2009年 / 255卷 / 11期
关键词：
Alumina; Zirconia; Suspension plasma spray; Amorphous powders; Nanocomposites; THERMAL BARRIER COATINGS; TITANIA COATINGS; SPLAT FORMATION; ZIRCONIA; MICROSTRUCTURE; FABRICATION; RESISTANCE; TIO2;
D O I：
10.1016/j.apsusc.2009.01.038
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Al(2)O(3)-ZrO(2) composite coatings were deposited by the suspension plasma spray process using molecularly mixed amorphous powders. X-ray diffraction (XRD) analysis shows that the as-sprayed coating is composed of alpha-Al(2)O(3) and tetragonal ZrO(2) phases with grain sizes of 26 nm and 18 nm, respectively. The as-sprayed coating has 93% density with a hardness of 9.9 GPa. Heat treatment of the as-sprayed coating reveals that the Al(2)O(3) and ZrO(2) phases are homogeneously distributed in the composite coating. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：5935 / 5938
页数：4
相关论文
共 50 条
  • [1] Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock
    S. V. Joshi
    G. Sivakumar
    T. Raghuveer
    R. O. Dusane
    Journal of Thermal Spray Technology, 2014, 23 : 616 - 624
  • [2] Hybrid Plasma-Sprayed Thermal Barrier Coatings Using Powder and Solution Precursor Feedstock
    Joshi, S. V.
    Sivakumar, G.
    Raghuveer, T.
    Dusane, R. O.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2014, 23 (04) : 616 - 624
  • [3] Effects of Feedstock Decomposition and Evaporation on the Composition of Suspension Plasma-Sprayed Coatings
    Mauer, G.
    Schlegel, N.
    Guignard, A.
    Vassen, R.
    Guillon, O.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2015, 24 (07) : 1187 - 1194
  • [4] Effects of Feedstock Decomposition and Evaporation on the Composition of Suspension Plasma-Sprayed Coatings
    G. Mauer
    N. Schlegel
    A. Guignard
    R. Vaßen
    O. Guillon
    Journal of Thermal Spray Technology, 2015, 24 : 1187 - 1194
  • [5] Revealing mechanical properties of a suspension plasma sprayed coating with nanoindentation
    Gross, Karlis A.
    Saber-Samandari, Saeed
    SURFACE & COATINGS TECHNOLOGY, 2009, 203 (20-21): : 2995 - 2999
  • [6] Microstructural, mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating
    Zhao, Yongli
    Wang, Yan
    Yu, Zexin
    Planche, Marie-Pierre
    Peyraut, Francois
    Liao, Hanlin
    Lasalle, Audrey
    Allimant, Alain
    Montavon, Ghislain
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (13) : 4512 - 4522
  • [7] A novel structured suspension plasma sprayed YSZ-PTFE composite coating with tribological performance improvement
    Wang, Yan
    Zhao, Yongli
    Darut, Geoffrey
    Poirier, Thierry
    Stella, Jorge
    Wang, Kuaishe
    Liao, Hanlin
    Planche, Marie-Pierre
    SURFACE & COATINGS TECHNOLOGY, 2019, 358 : 108 - 113
  • [8] A Novel Plasma-Sprayed Nanostructured Coating with Agglomerated-Unsintered Feedstock
    Gao, Yang
    Zhao, Yan
    Yang, Deming
    Gao, Jianyi
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (1-2) : 291 - 300
  • [9] A Novel Plasma-Sprayed Nanostructured Coating with Agglomerated-Unsintered Feedstock
    Yang Gao
    Yan Zhao
    Deming Yang
    Jianyi Gao
    Journal of Thermal Spray Technology, 2016, 25 : 291 - 300
  • [10] Mechanical and corrosion properties of plasma-sprayed Fe-based amorphous/nanocrystalline composite coating
    Kumar, Anil
    Nayak, Sapan Kumar
    Bijalwan, Pavan
    Dutta, Monojit
    Banerjee, Atanu
    Laha, Tapas
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2019, 5 (02) : 371 - 377
12345