Effect of magnesium in aluminum alloys on characteristics of microarc oxidation coatings

被引:0
|
作者
Liu Yao-hui [1 ]
Li Song [1 ]
Yu Si-rong [1 ]
Zhu Xian-yong [1 ]
Xu Bai-ming [1 ]
机构
[1] Jilin Univ, Coll Mat Sci & Engn, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
关键词
microarc oxidation; magnesium; alloying element; friction; wear; aluminum alloy;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Microarc oxidation(MAO) coatings were prepared on the surface of aluminum alloys with different contents of magnesium. The morphologies and surface roughness of the coatings were characterized by Confocal laser scanning microscopy(CLSM). Phase and chemical composition of the MAO coatings were analyzed by X-ray diffractometry(XRD) and X-ray photoelectron spectroscopy(XPS). The experimental results show that the coatings formed on different substrates have two-layer morphologies and are mainly composed of Al2O3 and Al-Si-O phases. In addition, the content of Al2O3 increases with increasing the content of magnesium. XPS results prove that magnesium from substrate indeed participates in the MAO process and is incorporated into the coating in the form of MgO. The coating formed on Al-3Mg substrate has the smallest mass loss and the lowest friction coefficient of 0.17-0.19.
引用
收藏
页码:S1624 / S1629
页数:6
相关论文
共 50 条
  • [31] Antiscuff coatings obtained by microarc oxidation of titanium alloys
    Gnedenkov, S.V.
    Gordienko, P.S.
    Sinebryukhov, S.L.
    Kovryanov, A.N.
    Khrisanfova, O.A.
    Cherednichenko, A.I.
    Korkosh, S.V.
    Khromushkin, K.D.
    2000, Maik Nauka-Interperiodica Publishing (73)
  • [32] Effect of Additional Resistance on Characteristics of Microarc Oxidation Coatings of Pure Titanium
    Chen Genyu
    Wu Hanhua
    Tang Yuanguang
    Chang Hong
    Xu Mingze
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (08) : 1488 - 1491
  • [33] Ceramic coatings by microarc oxidation of Ti and Al alloys
    Wang, Wen
    Xin, Chang
    Feng, Zaiqiang
    Li, Gang
    Zhang, Ruizhu
    Hu, Junhua
    Tang, Mingqi
    Liu, Yahui
    Zhang, Wei
    SURFACES AND INTERFACES, 2022, 33
  • [34] Ceramic coatings by microarc oxidation of Ti and Al alloys
    Wang, Wen
    Xin, Chang
    Feng, Zaiqiang
    Li, Gang
    Zhang, Ruizhu
    Hu, Junhua
    Tang, Mingqi
    Liu, Yahui
    Zhang, Wei
    SURFACES AND INTERFACES, 2022, 33
  • [35] Antiscuff coatings obtained by microarc oxidation of titanium alloys
    Gnedenkov, SV
    Gordienko, PS
    Sinebryukhov, SL
    Kovryanov, AN
    Khrisanfova, OA
    Cherednichenko, AI
    Korkosh, SV
    Khromushkin, KD
    RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 2000, 73 (01) : 6 - 9
  • [36] Formation of microarc oxidation coatings on magnesium alloy with photocatalytic performance
    Li, Weiping
    Tang, Mingqi
    Zhu, Liqun
    Liu, Huicong
    APPLIED SURFACE SCIENCE, 2012, 258 (24) : 10017 - 10021
  • [37] Corrosion resistance of the microarc oxidation coatings prepared on magnesium alloy
    Lv, Ying
    Li, Jun Gang
    Wu, Ming Zhong
    Ma, Zhen
    Zhang, Jing Qiang
    Wang, Le Le
    2018 4TH INTERNATIONAL CONFERENCE ON ENERGY MATERIALS AND ENVIRONMENT ENGINEERING (ICEMEE 2018), 2018, 38
  • [38] Microarc oxidation coatings containing TiC and NbC on magnesium alloy
    Tang, Mingqi
    Feng, Zaiqiang
    Wu, Xiangyang
    Wang, Wen
    Li, Gang
    Yan, Zhenwei
    Zhang, Ruizhu
    SURFACE ENGINEERING, 2020, 36 (11) : 1171 - 1179
  • [39] Growth Characteristics of Plasma Electrolytic Oxidation Coatings on Aluminum Alloys
    Ayday, A.
    Durman, M.
    ACTA PHYSICA POLONICA A, 2015, 127 (04) : 886 - 887
  • [40] Microstructure and properties of microarc oxidation ceramic coatings on aluminum alloy
    Liu, Wanhui
    Bao, Ailian
    Mao, Xinyu
    Zheng, Guanghai
    PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 1895 - 1898