Application of the FUN3D Solver to the 4th AIAA Drag Prediction Workshop

FUN3D Navier-Stokes solutions were computed for the 4th AIAA Drag Prediction Workshop grid-convergence study, downwash study, and Reynolds-number study on a set of node-based mixed-element grids. All of the baseline tetrahedral grids were generated with the VGRID (developmental) advancing-layer and advancing-front grid-generation software package following the gridding guidelines developed for the workshop. With maximum grid sizes exceeding 100 million nodes, the grid-convergence study was particularly challenging for the node-based unstructured grid generators and flow solvers. At the time of the workshop, the super-fine grid with 105 million nodes and 600 million tetrahedral elements was the largest grid known to have been generated using VGRID. FUN3D Version 11.0 has a completely new pre- and postprocessing paradigm that has been incorporated directly into the solver and functions entirely in a parallel, distributed-memory environment. This feature allowed for practical preprocessing and solution times on the largest unstructured-grid size requested for the workshop. For the constant-lift grid-convergence case, the convergence of total drag is approximately second-order on the finest three grids. The variation in total drag between the finest two grids is only two counts. At the finest grid levels, only small variations in wing and tail pressure distributions are seen with grid refinement. Similarly, a small wing side-of-body separation also shows little variation at the finest grid levels. Overall, the FUN3D results compare well with the structured-grid code CFL3D. For the grid-convergence case, the FUN3D total and component forces/moments are within one standard deviation of the workshop core solution medians and are very close to the median values especially at the finest grid levels. The FUN3D downwash study and Reynolds-number study results also compare well with the range of results shown in the workshop presentations.