The performance of TiN coated carbide tools when turning AISI 8620 steel

被引：6

作者：

de Avila, Renato Francoso

Abrao, Alexandre Mendes

Duraes de Godoy, G. Cristina

机构：

[1] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil

[2] Univ Fed Minas Gerais, Dept Met Engn, BR-30160030 Belo Horizonte, MG, Brazil

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2006年 / 179卷 / 1-3期

关键词：

crater wear volume; turning; topographic analysis; coatings;

D O I：

10.1016/j.jmatprotec.2006.03.066

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work is concerned with the performance of uncoated and coated carbide tools (ISO grade K10) with a 3 mu m thick monolayer of TiN (produced by PAPVD) when continuous turning AISI 8620 steel. For this purpose a topographic analysis was employed to assess the crater wear volume evolution. This methodology is considered a more realistic alternative to study crater wear when compared to the bi-dimensional parameters established by ISO 3685/93. The tests were carried out under typical machining conditions. The results indicated that two distinct crater wear rates are present when machining using coated cutting tools, whereas a higher and single wear rate was identified for the uncoated inserts. (c) 2006 Elsevier B.V. All rights reserved.

引用

页码：161 / 164

页数：4

共 50 条

[21] Experimental investigation of dry turning of AISI 1040 steel with TiN coated insert
Nair, Sreejith S.
Ramkumar, T.
Selva Kumar, M.
Netto, Fabian
ENGINEERING RESEARCH EXPRESS, 2019, 1 (02):
[22] EXAMINATION OF THE CUTTING FORCES OF AISI 304 AUSTENITIC STAINLESS STEEL IN THE TURNING PROCESS WITH TITANIUM CARBIDE COATED CUTTING TOOLS
Tekaslan, Ozgur
Gerger, Nedim
Gunay, Mustafa
Seker, Ulvi
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2007, 13 (02): : 135 - 144
[23] A comparative study on performance of multilayer coated and uncoated carbide inserts when turning AISI D2 steel under dry environment
Sahoo, Ashok Kumar
Sahoo, Bidyadhar
MEASUREMENT, 2013, 46 (08) : 2695 - 2704
[24] Performance of PVD TiN/TaN and TiN/NbN superlattice coated cemented carbide tools in stainless steel machining
Selinder, TI
Sjostrand, ME
Nordin, M
Larsson, M
Ostlund, A
Hogmark, S
SURFACE & COATINGS TECHNOLOGY, 1998, 105 (1-2): : 51 - 55
[25] Performance of coated, cemented carbide, mixed-ceramic and PCBN-H tools when turning W320 steel
Sales, W. F.
Costa, L. A.
Santos, S. C.
Diniz, A. E.
Bonney, J.
Ezugwu, E. O.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 41 (7-8): : 660 - 669
[26] Performance of coated, cemented carbide, mixed-ceramic and PCBN-H tools when turning W320 steel
W. F. Sales
L. A. Costa
S. C. Santos
A. E. Diniz
J. Bonney
E. O. Ezugwu
The International Journal of Advanced Manufacturing Technology, 2009, 41 : 660 - 669
[27] Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment
Das, Anshuman
Kumar, Anuj
Padhan, Smita
Das, Sudhansu Ranjan
Satpathy, Mantra Prasad
Patel, Saroj Kumar
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2024, 46 (05)
[28] On the wear of coated carbide inserts in high-speed turning of AISI 1045 steel
Balaji, A
Varghese, V
Jayal, AD
TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 557 - 564
[29] Characterization and Performance of AlTiN, AlTiCrN, TiN/TiAlN PVD Coated Carbide Tools While Turning SS 304
Kulkarni, Atul Prabhakar
Sargade, Vikas G.
MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (06) : 748 - 755
[30] Evaluation of vegetable and mineral oil-in-water emulsion cutting fluids in turning AISI 4340 steel with coated carbide tools
Lawal, Sunday Albert
Choudhury, Imtiaz Ahmed
Nukman, Yussof
JOURNAL OF CLEANER PRODUCTION, 2014, 66 : 610 - 618

← 1 2 3 4 5 →