Microstructure and mechanical properties of friction spot welds of dissimilar AA5754 Al and AZ31 Mg alloys

被引：78

作者：

Suhuddin, U. ^{[1
]}

Fischer, V. ^{[1
,2
]}

Kroeff, F. ^{[1
,2
]}

dos Santos, J. F. ^{[1
]}

机构：

[1] Helmholtz Zentrum Geesthacht, Ctr Mat & Coastal Res, Inst Mat Res Mat Mech, Solid State Joining Proc Dept, D-21502 Geesthacht, Germany

[2] Univ Fed Rio Grande do Sul, Met Phys Lab, BR-90040060 Porto Alegre, RS, Brazil

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2014年 / 590卷

关键词：

Friction spot welding; Dissimilar; Intermetallics; Diffusion; MAGNESIUM ALLOY; ALUMINUM-ALLOY;

D O I：

10.1016/j.msea.2013.10.057

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In the present study, friction spot welding or refill friction stir spot welding was performed to consolidate dissimilar AA5754 Al and AZ31 Mg alloys. The intermetallic compounds of Al12Mg17 and Al3Mg2 were primarily found in the weld, distributed at the interface between the base materials and in the Al top sheet. The distribution of the intermetallic compounds and the interfacial area between the base materials affect the lap shear strength of the weld. It is concluded that the material flow induced by tool movement plays an important role in both the distribution of the intermetallic compounds and the interfacial area between the base materials. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：384 / 389

页数：6

共 50 条

[31] Material Flow Behavior and Mechanical Properties of Dissimilar Friction Stir Welded Al 7075 and Mg AZ31 Alloys Using Cd Interlayer
Satya Kumar Dewangan
M. K. Tripathi
M. K. Manoj
Metals and Materials International, 2022, 28 : 1169 - 1183
[32] Friction stir welding of dissimilar formed Mg alloys (AZ31/AZ91)
Lee, CY
Lee, WB
Yeon, YM
Jung, SB
ECO-MATERIALS PROCESSING & DESIGN VI, 2005, 486-487 : 249 - 252
[33] Mechanical properties and corrosion behaviour of dissimilar friction stir-welded Al 7075 and Mg AZ31 alloys with Cd and Zn interlayer
Dewangan, Satya Kumar
Tripathi, M. K.
Banjare, P. N.
Bhowmik, A.
Manoj, M. K.
CANADIAN METALLURGICAL QUARTERLY, 2025, 64 (01) : 187 - 195
[34] Material Flow Behavior and Mechanical Properties of Dissimilar Friction Stir Welded Al 7075 and Mg AZ31 Alloys Using Cd Interlayer
Dewangan, Satya Kumar
Tripathi, M. K.
Manoj, M. K.
METALS AND MATERIALS INTERNATIONAL, 2022, 28 (05) : 1169 - 1183
[35] The effect of the inhomogeneous microstructure and texture on the mechanical properties of AZ31 Mg alloys processed by friction stir processing
Peng, Jinhua
Zhang, Zhen
Huang, Ji'an
Guo, Peng
Li, Yaozu
Zhou, Wei
Wu, Yucheng
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 792 : 16 - 24
[36] Mechanical and microstructural properties of friction stir welded AA5083 and AA5754 aluminium alloys
Tolun, F.
KOVOVE MATERIALY-METALLIC MATERIALS, 2021, 59 (03): : 149 - 160
[37] Microstructure of stir zone in dissimilar friction stir welds of AA6061-T6 and AZ31 alloy sheets
Lee, Kwang-Jin
Kwon, Eui-Pyo
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) : 2374 - 2379
[38] Effect of vertical and horizontal zinc interlayer on material flow, microstructure, and mechanical properties of dissimilar FSW of Al 7075 and Mg AZ31 alloys
Satya Kumar Dewangan
Pragya Nandan Banjare
Manwendra Kumar Tripathi
Manoranjan Kumar Manoj
The International Journal of Advanced Manufacturing Technology, 2023, 126 : 4453 - 4474
[39] Microstructural features and mechanical properties of AM60 and AZ31 friction stir spot welds
Yin, Y. H.
Ikuta, A.
North, T. H.
MATERIALS & DESIGN, 2010, 31 (10) : 4764 - 4776
[40] Effect of vertical and horizontal zinc interlayer on material flow, microstructure, and mechanical properties of dissimilar FSW of Al 7075 and Mg AZ31 alloys
Dewangan, Satya Kumar
Banjare, Pragya Nandan
Tripathi, Manwendra Kumar
Manoj, Manoranjan Kumar
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (9-10): : 4453 - 4474

← 1 2 3 4 5 →