On the effect of fully reversed deformation on the austenite to ferrite phase transformation in C-Mn steel

被引:12
|
作者
Davenport, SB
Hanlon, DN
van der Zwaag, S
机构
[1] Netherlands Inst Metals Res, NL-2628 AL Delft, Netherlands
[2] Delft Tech Univ, Mat Sci Lab, NL-2628 AL Delft, Netherlands
关键词
steel; strain reversal; austenite; ferrite; phase transformation; torsion;
D O I
10.1016/S1359-6462(01)01256-8
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Different deformation histories have been used prior to cooling through the phase transformation to study the effect of deformation on the austenite-ferrite transformation. By comparing transformation after forward and reversed deformations the relevant parameters have been decoupled in a manner that was otherwise not possible. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:413 / 417
页数:5
相关论文
共 50 条
  • [31] Austenite decomposition of C-Mn steel containing boron by continuous cooling
    Gárlipp, W
    Cilense, M
    Gomes, SIN
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 114 (01) : 71 - 74
  • [32] C-Mn segregation and its effect on phase transformation in Fe-Mn-C alloys
    吕宇鹏
    朱瑞富
    李士同
    张福成
    王世清
    Progress in Natural Science:Materials International, 1999, (07) : 60 - 65
  • [33] Laser-ultrasonic monitoring of austenite recrystallization in C-Mn steel
    Smith, Ali
    Kruger, Silvio E.
    Sietsma, Jilt
    van der Zwaag, Sybrand
    ISIJ INTERNATIONAL, 2006, 46 (08) : 1223 - 1232
  • [34] C-Mn segregation and its effect on phase transformation in Fe-Mn-C alloys
    Lü, YP
    Zhu, RF
    Li, ST
    Zhang, FC
    Wang, SQ
    PROGRESS IN NATURAL SCIENCE, 1999, 9 (07) : 539 - 544
  • [35] ON THE TRANSFORMATION KINETICS OF WORK-HARDENED AUSTENITE (GAMMA)-]PRO-EUTECTOID FERRITE (ALPHA) OF C-MN STEELS
    LIU, Z
    WANG, G
    ZHANG, Q
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 44 (1-2) : 75 - 80
  • [36] Austenite to Ferrite Transformation after Hot Deformation of Low Carbon Steel
    Deni, Ferdian
    Anton, Norman
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 2801 - 2807
  • [37] EFFECT OF ROLLING CONDITIONS ON GAMMA-]FP TRANSFORMATION IN C-MN STEEL
    TERADA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1463 - 1463
  • [38] C-Mn segregation and its effect on phase transformatio and deformation in Fe-Mn-C alloys
    Coll. of Mat. Sci. and Engineering, Shandong University of Technology, Jinan 250061, China
    Sci China Ser E Technol Sci, 6 (x2-573):
  • [39] Austenite formation during intercritical annealing in C-Mn cold-rolled dual phase steel
    Sheng-ci Li
    Yong-lin Kang
    Guo-ming Zhu
    Shuang Kuang
    Journal of Central South University, 2015, 22 : 1203 - 1211
  • [40] Austenite formation during intercritical annealing in C-Mn cold-rolled dual phase steel
    Li Sheng-ci
    Kang Yong-lin
    Zhu Guo-ming
    Kuang Shuang
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2015, 22 (04) : 1203 - 1211