Determination of As(III) by anodic stripping voltammetry following double deposition and stripping steps at two gold working electrodes

被引:22
|
作者
Korolczuk, Mieczyslaw [1 ]
Ochab, Mateusz [1 ]
Rutyna, Iwona [1 ]
机构
[1] Marie Curie Sklodowska Univ, Fac Chem, PL-20031 Lublin, Poland
关键词
Stripping analysis; Double deposition; Arsenic; Determination; SCREEN-PRINTED ELECTRODES; GLASSY-CARBON ELECTRODE; ELECTROCHEMICAL DETECTION; ARSENIC(III); SPECIATION; LEAD; INTERFERENCE; WATER;
D O I
10.1016/j.talanta.2015.06.084
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
The double deposition and stripping steps were proposed to minimize interference and increase the sensitivity in anodic stripping voltammetry of As(III). Two working electrodes of drastically different surface areas were used for the measurements. Arsenic was first deposited at the gold film electrode of a large surface area. When the deposition step at this electrode finished, the electrode was moved at a short distance to the second electrode consisting of four gold microelectrodes. The arsenic stripped from the first electrode was partially deposited at the microelectrodes and the analytical signal was obtained by its oxidation. Due to double deposition of arsenic the interference of Cu(II) was minimized and the detection limit of As(III) was lowered by one order of magnitude. The calibration graph was linear from 5 x 10(-1) to 1 x 10(-8) mol L-1 following deposition time of 300s at the first and the second electrode. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:517 / 521
页数:5
相关论文
共 50 条