On the graphene nanoplatelets reinforcement of hand lay-up glass fabric/epoxy laminated composites

被引：38
|
作者：
Seretis, G. V. [1 ]
Kouzilos, G. [1 ]
Manolakos, D. E. [1 ]
Provatidis, C. G. [1 ]
机构：
[1] Natl Tech Univ Athens, Sch Mech Engn, 9 Heroon Polytech Str, Athens 15780, Greece
来源：
COMPOSITES PART B-ENGINEERING | 2017年 / 118卷
关键词：
Laminates; Polymer-matrix composites (PMCs); Mechanical properties; Electron microscopy; THERMAL INTERFACE MATERIALS; MECHANICAL-PROPERTIES; CARBON NANOTUBES; TIMOSHENKO NANOBEAMS; POLYMER COMPOSITES; EPOXY COMPOSITES; NANOCOMPOSITES; MODEL; FORMULATION;
D O I：
10.1016/j.compositesb.2017.03.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Bending and tensile performance of hand lay-up produced glass fabric/epoxy laminated composites were investigated after matrix reinforcement with pre-dried graphene nanoplatelets (GNPs) up to 30% wt content. Two different types of E-glass fabric, i.e. twill 2 x 2 and uni-directional, were used for the tested composite samples. The response of the produced nano-composites is being explained by the settling mode of the GNPs onto the surface of the fiberglass filaments, as it was observed by a scanning electron microscope. Due to the different settling modes while increasing GNPs content, different fracture modes of the filaments were detected. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：26 / 32
页数：7
相关论文
共 50 条
  • [31] Composites realized by hand lay-up process in a civil engineering environment: initial properties and durability
    Sofiène Marouani
    Laurence Curtil
    Patrice Hamelin
    [J]. Materials and Structures, 2008, 41 : 831 - 851
  • [32] A treatise on multiscale glass fiber epoxy matrix composites containing graphene nanoplatelets
    Zaheer, Usama
    Khurram, Aqeel A.
    Subhani, Tayyab
    [J]. ADVANCED COMPOSITES AND HYBRID MATERIALS, 2018, 1 (04) : 705 - 721
  • [33] A treatise on multiscale glass fiber epoxy matrix composites containing graphene nanoplatelets
    Usama Zaheer
    Aqeel A. Khurram
    Tayyab Subhani
    [J]. Advanced Composites and Hybrid Materials, 2018, 1 : 705 - 721
  • [34] Influence of molding operation times on mechanical properties of the composites prepared by hand lay-up method
    Migaki, Masakazu
    Hamada, Hiroyuki
    [J]. 20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [35] Nonlinear analysis of laminated shells with alternating stiff/soft lay-up
    Liang, Y.
    Izzuddin, B. A.
    [J]. COMPOSITE STRUCTURES, 2015, 133 : 1220 - 1236
  • [36] Effect of lamination anisotropy and lay-up in glued-laminated timbers
    Aicher, S
    Dill-Langer, G
    [J]. JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2005, 131 (07): : 1095 - 1103
  • [37] Manufacturing and Mechanical Properties of Graphene Coated Glass Fabric and Epoxy Composites
    Umer, Rehan
    [J]. JOURNAL OF COMPOSITES SCIENCE, 2018, 2 (02):
  • [38] BUCKLING OF HAND LAY-UP COMPOSITE CYLINDRICAL VESSEL.
    Hoa, S.V.
    Berczynski, W.S.
    Sankar, T.S.
    [J]. Journal of Reinforced Plastics and Composites, 1985, 4 (02) : 162 - 172
  • [39] HAND LAY-UP METHOD OF MR-FRP JOINT
    FUJIMURA, Y
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S768 - S768
  • [40] Tensile behaviour of open hole flax/epoxy composites: Influence of fibre lay-up and drilling parameters
    Nasir, Aiman Akmal Abdul
    Azmi, Azwan Iskandar
    Lih, Tan Chye
    Khalil, Ahmad Nabil Mohd
    Kim, Nam Kyeun
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (04) : 445 - 454
12345